Rusts formation inside our 6th month old Honda City

[dr. d]

i am amused at how jick does it over there, and how we do it over here.

not a critique. just an observation.

[im.ben]

Turco/rust converter rin recommend ko

Expect if Honda replaces the part the replacement will most likely get surface rust again since it is bare metal.

Thanks sa recommendation sir. Magdalawang isip siguro ako kung offer-an ako ng replacement sa part/s na may rust. Pero kung whole car, pwede na! :D

Sent from my LG-H860 using Tapatalk

[im.ben]

Check seat springs, too.
This will do...
Corrosion Inhibitor & Control Spray - WD-4 Specialist

Sent from my SM-G950F using Tapatalk

Will do sir. Thanks!

Sent from my LG-H860 using Tapatalk

[yapoy86]

May konting kirot sa puso ko kasi 1st car namin to ni misis tapos may ganito.

Sent from my LG-H860 using Tapatalk

its just surface rust.. same thing happens when your disc brakes get wet from the car wash!

iba yan dun sa "bulok" sa kalawang.. hindi yan magiging dahilan para masira yun structural integrity ng sasakyan mo..

[Kimchijiji]

Yes, sir. Dapat free from any cost to. Thanks for the suggestion.

Sent from my LG-H860 using Tapatalk

Dapat lng. Iheld liable mo ang casa. Dont settle for less. Kabago bago tas gnyn


Sent from my iPhone using Tapatalk

[im.ben]

well, if casa refuses to fix it, i'd do it myself.
metal brush, turco, red lead, salonpas for my acheing back!
and oh! get yourself a pair of goggles.

Wow, bait mo naman doc. I'll buy you 1 box of salonpas. Hehe.

I think disaasembly of the dash (I might be wrong) will be needed kasi yung ibang parts na may kalawang, medyo nasa pinaka loob na area. Kaya napapadalawang isip ako ipagawa sa casa.

Sent from my LG-H860 using Tapatalk

[yapoy86]

If libre reremedyuhan ng casa, paayos nyo na po sana. Otherwise pwede nyo sya i-soak or pahiran ng WD40 or similar product. Di bale nang ma-attract konting alikabok basta may peace of mind lang po

stay away from WD-40.. lalo lang kakalawangin yan.. i only use that as a "penetrating oil" to loosen nuts and bolts and clean them off after and use the applicable grease or oil on installation.

[yapoy86]

Wow, bait mo naman doc. I'll buy you 1 box of salonpas. Hehe.

I think disaasembly of the dash (I might be wrong) will be needed kasi yung ibang parts na may kalawang, medyo nasa pinaka loob na area. Kaya napapadalawang isip ako ipagawa sa casa.

Sent from my LG-H860 using Tapatalk

waste of time imho.. plus dismantling the dash will only result to unwanted creaks and rattles.. just leave it as it is as there is no intervention necessary or if you really want just brush small amount of grease. what you need to check is if you have body rust especially underneath the running board.

[StockEngine]

Unpainted, yes. Pero question ko dyan, bakit parang mabilis kalawangin? I think there should be some anti-rust chemical applied on it since moisture is inevitable. Also, I've asked few of my friends who also has the same car (older and newer), wala naman daw kalawang sa kanila.

Sent from my LG-H860 using Tapatalk

after 10years the structure will still do its job...

Sent from my SM-G935F using Tapatalk

[dr. d]

Wow, bait mo naman doc. I'll buy you 1 box of salonpas. Hehe.

I think disaasembly of the dash (I might be wrong) will be needed kasi yung ibang parts na may kalawang, medyo nasa pinaka loob na area. Kaya napapadalawang isip ako ipagawa sa casa.

Sent from my LG-H860 using Tapatalk

whoa!
when i said "I'd", i was speaking for you. it meant, you do it yourself!
heh heh.

don't dis-assemble it. just do the best your fingers can get at.

i can do it, but at doctor's fees.
deal?

yes, the structure will still be there after 10 years.
but you and i will know.
and i can't just let it so.
"professional pride."