intake manifold [b18c] bore out??

**PN3467** · December 5th, 2009 09:57 PM

does anyone here know a shop that can bore out intake manifold.?? [70mm]

**niky** · December 6th, 2009 09:58 AM

Port match, maybe. To bore an intake manifold, you'll need an extrude hone done. Don't know any shops that have the machines to perform this here.

Why do you need this? The stock manifold is usually enough for 200+ hp.

**PN3467** · December 6th, 2009 07:42 PM

Originally Posted by niky

Port match, maybe. To bore an intake manifold, you'll need an extrude hone done. Don't know any shops that have the machines to perform this here.

Why do you need this? The stock manifold is usually enough for 200+ hp.

i have a skunk2 intake manifold that it can bore out up to 75mm, but i just want to match it to my 70mm throttle body.

i know the stock B18C type-r can handle 200hp, i have turbo and my whp is way pass 200hp..

gusto ko sana malaman kung san shop meron na nag port match. kung wala sa pinas baka DIY ko na lang.

**speed unlimited** · December 6th, 2009 09:01 PM

Try AER engine rebuilder in Manila .

**PN3467** · December 6th, 2009 10:52 PM

Speed unlimited, do you know how much it would cost me and how long it would take?

is there another shop around pasig/rizal area? [para palapit lapit samin]

**niky** · December 7th, 2009 11:36 AM

If it's port matching... yeah... that's relatively simple. There are a bunch of guys who could do it.

You can give a call to Speedlab and ask if they have the contact for Bernard, he's the one who ported my engine and port-matched my intake and throttle. Nice work.