Results 1 to 3 of 3
-
Verified Tsikot Member
- Join Date
- Aug 2009
- Posts
- 11
October 5th, 2011 12:00 PM #1The driver side power windows of my city 2006 malfunctioned after I replaced its battery. I read in a forum that I have to do a reset procedure of the power windows everytime you change your batter. Is this true? If true, can you guys post here the procedure. Thanks a lot.
-
October 5th, 2011 12:16 PM #2
Oo. Tama. Nirereset nga yan.
http://www.hondafitjazz.com/manual/A...123LBAT00.HTML
Kahit step 9 pababa muna ang gawin mo.
Pero mas importante gawin mo yung idle learn procedure after mo mag disconnect ng battery.
-
October 5th, 2011 11:54 PM #3
ganyan din nangyari sa City 08 (cvt) ko after magpalit ako ng battery ayaw na gumana mag automatic ng power windows sa driver side. wala naman ako ni-reset pero natatandaan ko may nabasa ko dito sa forum pinatakbo ko lang ng 60kph-80kph then release the gas pedal. hayaan mo lang kusa mag deaccelerate (approx 20kph) tapos try ko ulit yung power windows sa driver side kung nag a-automatic na ulit.. presto gumana na ulit :D
there's this youtube article, about a 2000s altis, that had a high rpm on cold start (2000+ daw),...
high idle RPM at engine start