When to change gears?

[aDoNiSiOuS]

Paki-share lang mga ideas nyo about shifting gears.
To start movement 1st gear syempre , and once the car is already in motion, 2nd gear agad, then cruising 3rd gear, tapos 4th-5th gear when trying to get some more speed.
My question is, at what speed km/h should you really change gears. Sabi nila when you reach 40 km/h dapat 4th gear ka na.
How about pag traffic?
Flooded streets/areas? 1st gear or 2nd gear.

Pls. post, post, post.

[ssaloon]

Actually, you should base your shifting on the tachometer (RPM) rather than the speedometer. Also depends on conditions and driving style. If you want to save on fuel, shift up when you reach 2000rpm.

[niky]

If the engine sounds like it's about to blow up, it's either time to shift up into the next gear, or if you're in top gear... slow down. :hysterical:

-

The appropriate time to shift will depend on the engine and situation. For smaller gasoline engines, it's more appropriate to shift up at around 2500-3000 rpm (as long as the gears aren't incredibly long), while bigger gasoline engines and diesels will feel comfortable shifting up at 2000-2500 rpm.

On most cars you start in 1st gear... on some you can start in 2nd (L300, anyone? :hysterical ) with no problems.

There's no golden rule. In my old 1.3, I was in 4th by 50 km/h. In my 2.0, I'm in 5th. In the Focus diesel, I'm in 6th... ...as long as the car isn't lugging (naghihirap... or nagkakabayo...)... then you're in the right gear.

[Gerbo]

There is no hard and fast rules. Generally, listen to the sound of the engine and let it be your guide.

[delete250]

correct! tama si gerbo.

There is no hard and fast rules. Generally, listen to the sound of the engine and let it be your guide.

[MaxAJ]

there are rules but its practically flexible, one can base it on the rpm

[MaxAJ]

there are rules but its practically flexible, one can base it on the rpm

[flakez]

around 2k rpm ako mag shift depending kung kelangan ng extra power like pataas or mag overtake.

[batusai_jr]

i usually shift before 2rpm. short shifting maybe, it works for me

[mackie0321]

I usually shift at 2k rpm. Tipid sa gas.

Pero pagfeel na feel ko pagdrive, 3k - 3.5k max na.