Sleeve an Engine?

[gearspeed]

Where can I have an engine sleeved for high horsepower engines?
Whats the name of the shop and what is the full address and contact numbers of the shop that does sleeve an engine?

Some say it doesn't need to be sleeve but since its for a turbo and I wanted to be sure it won't blow up. I am looking for one who can sleeve the engine.

Thanks.

[tip_tipid]

you can go to any big machine shops for this.

[yapoy86]

if your near cavite, you may go to JS Machine Shop near SM Bacoor. or in muntinlupa AMBER Machine shop..

sa JS Machine shop may precision machine sila dun na pang bore.. lalakihan ng konti yan bore mo para ma accomodate yung sleeve

[gearspeed]

if your near cavite, you may go to JS Machine Shop near SM Bacoor. or in muntinlupa AMBER Machine shop..

sa JS Machine shop may precision machine sila dun na pang bore.. lalakihan ng konti yan bore mo para ma accomodate yung sleeve

Sir ito ba yung mga known at magagaling na machine shop?
Advice sa akin ang key daw ay dapat magaling na machine shop sa pag sleeve ng engine.
Ano ba kailangan isama at mga parts na kailangan para sa pag sleeve?
Ano complete address and telephone number ng AMBER at JS machine shop?
Anong mga engines tulad ng honda,toyota,mitsubishi and nissan ang nagawa nilang isleeve dun both sa JS and AMBER?
Puntahan ko this week itong mga machine shop na ito.

Thanks.

[gearspeed]

you can go to any big machine shops for this.

Where are those big machine you may know?
complete address and contact numbers as well.

Thanks

[gearspeed]

Sir yapoy86 from daanghari saan daan ko after nun papuntang JS Machine Shop?
Yung AMBER saan sa Muntinlupa?
Tumawag ako kaso sabi not yet in service yung landline nila..

Thanks.

[yapoy86]

Sir yapoy86 from daanghari saan daan ko after nun papuntang JS Machine Shop?
Yung AMBER saan sa Muntinlupa?
Tumawag ako kaso sabi not yet in service yung landline nila..

Thanks.

yung amber along muntinlupa road lang... kung galing ka alabang few kilometers lang from via duct..

yung JS machine shop malapit sa SM Bacoor.. tanong mo lang dun.. malaking machine shop yan

[gearspeed]

yung amber along muntinlupa road lang... kung galing ka alabang few kilometers lang from via duct..

yung JS machine shop malapit sa SM Bacoor.. tanong mo lang dun.. malaking machine shop yan

Thanks so far napuntahan ko palang ay yung JS machine shop malaki nga yung machine shop at may mga clients na rin sila na known performance shop.
Sabi pa ng JS huwag muna ako magorder ng aftermarket parts para alam kung ano size na dapat na piston for the engine.Titignan din nila kung kaya nila gawin yung engine na yun.
Puntahan ko next week yung precision.Tinawagan ko rin yung precision sabi nung nakausap ko naka pag sleeve na sila ng k24 engine maganda rin dahil wala pa akong alam na nakapagsleeve na ng k24 engine na sucessful.

[jick.cejoco]

Where can I have an engine sleeved for high horsepower engines?
Whats the name of the shop and what is the full address and contact numbers of the shop that does sleeve an engine?

Some say it doesn't need to be sleeve but since its for a turbo and I wanted to be sure it won't blow up. I am looking for one who can sleeve the engine.

Thanks.

check if your engine has a turbocharged version and if the engine family is the same. usually, the engine block and head are already ready for turbo addition. the engine will not "blow up" because of turbo overboost but will surely start knocking.if the turbocharger capacity is matched with the engine and that the pressure is not excessive, it should work fine. otherwise, you can waste your money on something you might not need afterall

[rac98]

Check out vwPrecision Automotive, they may be able to do the job.

[gearspeed]

I don't think it has a turbocharged version although one engine had it supercharged but its from the lotus vehicle the one I purchase is not from the lotus engine itself its from a celica they install a turbo and big turbo as well but they had it sleeved some wento 500hp,600hp and as far as 800whp. One even said they did not sleeve it but I want to be sure so I want to have it sleeved. They also say its also on the turbo set up but as far as I know it should start from the engine sleeve itself then put those aftermarket parts and turbo.
Going to check that vwPrecision Automotive as well.

Thanks,

[jick.cejoco]

I don't think it has a turbocharged version although one engine had it supercharged but its from the lotus vehicle the one I purchase is not from the lotus engine itself its from a celica they install a turbo and big turbo as well but they had it sleeved some wento 500hp,600hp and as far as 800whp. One even said they did not sleeve it but I want to be sure so I want to have it sleeved. They also say its also on the turbo set up but as far as I know it should start from the engine sleeve itself then put those aftermarket parts and turbo.
Going to check that vwPrecision Automotive as well.

Thanks,

are you talking about 3s engine? they come in 3sge and 3sgte. the only thing they changed was the cylinder head, changed the air induction system and changed the exhaust system. with it they installed a different ecu

[gearspeed]

are you talking about 3s engine? they come in 3sge and 3sgte. the only thing they changed was the cylinder head, changed the air induction system and changed the exhaust system. with it they installed a different ecu

Its a 2zzge engine sir.The plan before was to buy overseas a 3sgte engine and ship it here but one friend of mine suggested the 2zzge engine is better and more of an upgrade so we bought one overseas and it was already ship here..The other aftermarket parts will also follow and to be bought overseas.
Thanks sir jick for the information about the 3sgte and 3sge.