Remote bypass oil filtration

[dvldoc]

For some reason they pulled thier msds sheets from the site, Even the link is dead. http://www.royalpurple.com/prod-pdfs/motor-oil-ps.pdf

Sorry I don't know how to post these in proper format.

40 DD 10W30D 15W40**
CF-2 CH-4/SJ CH-4/SJ
CI-4/SL CI-4/SL
D-445 Viscosity
cSt * 40°C 138.9 67.3 110.1
cSt * 100°C 15.0 10.9 14.9
SSU *100°F 725 344 567
SSU * 210°F 100 62 79
D-2270 Viscosity Index 108 144 140
D-92 Flash Point °F 460 400 435
D-92 Fire Point °F 510 450 470
D-97 Pour Point °F -40 -56 -44
D-2896 Total Base No. 7.5 10.0 10.5
D-874 Sulfate Ash % 0.72 — —
D-4951 Zinc, ppm 812 — —
0W40**** 5W20** 5W30** 5W40**** 10W30** 10W40 15W40*** 20W50
SM/CF SL SL SM/CF SL CG-4, CH-4 CG-4, CH-4 CF/SJ ASTM TESTS CI-4/SL CI-4/SL
D-445 Viscosity
cSt * 40°C 79.9 49.5 65.3 93.7 70.3 94.0 110.1 170.0
cSt * 100°C 14.3 8.7 11.0 15.7 10.8 14.0 15.3 20.2
SSU *100°F 395 253 332 476 360 482 567 880
SSU * 210°F 74 56 64 82 63 75 79 102
D-2270 Viscosity Index 182 156 157 179 140 148 140 138
D-4684 Pumping Viscosities
cP * -40°C 20,000 — — — — — — —
cP * -35°C — 22,200 34,800 21,500 — — — —
cP * -30°C — — — — 18,200 14,900 — —
cP * -25°C — — — — — — 15,200 —
cP * -20°C — — — — — — — 18,800
D-92 Flash Point °F 465 455 440 425 430 400 450 435
D-92 Fire Point °F 495 480 480 470 480 435 470 470
D-2896 Total Base No. 11 12 12 11 12 12.0 10.5 10.5
GASOLINE ENGINES — Typical Properties*
30 40 50
ASTM TESTS CF,CF-2/SJ CF,CF-2/SJ CF,CF-2/SJ
D-445 Viscosity
cSt * 40°C 79.0 121.0 182.0
cSt * 100°C 10.6 14.2 18.6
SSU *100°F 408 631 955
SSU * 210°F 63 74 92
D-2270 Viscosity Index 119 113 113
D-92 Flash Point °F 460 460 460
D-92 Fire Point °F 515 515 515
D-2896 Total Base No. 10.5 10.5 10.5

[tuazon7]

For some reason they pulled thier msds sheets from the site, Even the link is dead. http://www.royalpurple.com/prod-pdfs/motor-oil-ps.pdf

Sorry I don't know how to post these in proper format.

40 DD 10W30D 15W40**
CF-2 CH-4/SJ CH-4/SJ
CI-4/SL CI-4/SL
D-445 Viscosity
cSt * 40°C 138.9 67.3 110.1
cSt * 100°C 15.0 10.9 14.9
SSU *100°F 725 344 567
SSU * 210°F 100 62 79
D-2270 Viscosity Index 108 144 140
D-92 Flash Point °F 460 400 435
D-92 Fire Point °F 510 450 470
D-97 Pour Point °F -40 -56 -44
D-2896 Total Base No. 7.5 10.0 10.5
D-874 Sulfate Ash % 0.72 — —
D-4951 Zinc, ppm 812 — —
0W40**** 5W20** 5W30** 5W40**** 10W30** 10W40 15W40*** 20W50
SM/CF SL SL SM/CF SL CG-4, CH-4 CG-4, CH-4 CF/SJ ASTM TESTS CI-4/SL CI-4/SL
D-445 Viscosity
cSt * 40°C 79.9 49.5 65.3 93.7 70.3 94.0 110.1 170.0
cSt * 100°C 14.3 8.7 11.0 15.7 10.8 14.0 15.3 20.2
SSU *100°F 395 253 332 476 360 482 567 880
SSU * 210°F 74 56 64 82 63 75 79 102
D-2270 Viscosity Index 182 156 157 179 140 148 140 138
D-4684 Pumping Viscosities
cP * -40°C 20,000 — — — — — — —
cP * -35°C — 22,200 34,800 21,500 — — — —
cP * -30°C — — — — 18,200 14,900 — —
cP * -25°C — — — — — — 15,200 —
cP * -20°C — — — — — — — 18,800
D-92 Flash Point °F 465 455 440 425 430 400 450 435
D-92 Fire Point °F 495 480 480 470 480 435 470 470
D-2896 Total Base No. 11 12 12 11 12 12.0 10.5 10.5
GASOLINE ENGINES — Typical Properties*
30 40 50
ASTM TESTS CF,CF-2/SJ CF,CF-2/SJ CF,CF-2/SJ
D-445 Viscosity
cSt * 40°C 79.0 121.0 182.0
cSt * 100°C 10.6 14.2 18.6
SSU *100°F 408 631 955
SSU * 210°F 63 74 92
D-2270 Viscosity Index 119 113 113
D-92 Flash Point °F 460 460 460
D-92 Fire Point °F 515 515 515
D-2896 Total Base No. 10.5 10.5 10.5

thanks doc! with these values, seems that Mobil MX is better than RP 15W-40. but the bearing test showed otherwise. For 4D56 Tubo-Intercooled CrDI, is it just okay to have 15k OCI if using RP 15W-40/LF3564?

[dvldoc]

thanks doc! with these values, seems that Mobil MX is better than RP 15W-40. but the bearing test showed otherwise. For 4D56 Tubo-Intercooled CrDI, is it just okay to have 15k OCI if using RP 15W-40/LF3564?

If you really want to find out instead of guessing do a oil analysis at 12000klm.

[tuazon7]

If you really want to find out instead of guessing do a oil analysis at 12000klm.

Thanks doc and for all the other inputs!

[timo07]

If you really want to find out instead of guessing do a oil analysis at 12000klm.

dvldoc, what are the parameters to be looked at?

[miko101130]

dvldoc, what are the parameters to be looked at?

Bro, basically pag nag pa oil analysis ang tinitignan is Elemental wear analysis, yung mga iron,lead,copper,silicon,chromium etc, na nasa oil mong ginamit, para malaman ang wear sa engine, pero it needs to be done in pattern, kung isang beses lang oil analysis hindi kasi conclusive unless na several times at regular interval ang analysis para meh mag emerge na pattern...

tapos yung TBN (total base number), kung ilan pa natitira na TBN to fight the acidity
then kung gusto mo pwede din yung (TAN) total acid number naman,

Then lastly yung mga fuel count at soot count at coolant count on the oil...