Results 1 to 10 of 18
-
Verified Tsikot Member
- Join Date
- Oct 2005
- Posts
- 147
May 11th, 2006 03:06 PM #1Hello
nag papalano ako ng major engine restoration. start sana ako this weekend.
tanong ko lang magkano kaya ang mga items below pati recomended brands?
1. piston rings
2. pistons
3. rods
4. bearings
5. oil seals sa bandang crank shafts
6. pati siguro oil seal ng transmission
kung meron kayo recomended na autosupply na puwede inisin sa katatawag at katatanong ko ok din hehehe
thanks
,Fernan
-
-
May 11th, 2006 04:57 PM #3
plan a trip to pasay rotonda. madami dyan autosupply. makakamura ka dyan.
-
Tsikot Member Rank 5
- Join Date
- Nov 2003
- Posts
- 3,849
May 11th, 2006 08:14 PM #4what engine? not all autosupplies will have the complete parts for the engine. who's building the engine for you?
-
Verified Tsikot Member
- Join Date
- Oct 2005
- Posts
- 147
May 11th, 2006 10:47 PM #5It's my old pickup mazda R2. I'll be doing the job my self since I am not going to use the pickup for a while.
I will probably need help with injector calibration and injection pump timming though.
-
Tsikot Member Rank 5
- Join Date
- Nov 2003
- Posts
- 3,849
May 11th, 2006 10:50 PM #6allright. you'll probably need to know if you need standard rings and bearings. check all clearances and use plastigauge to find out so you know what to specify when buying the parts.
-
Tsikoteer
- Join Date
- Jan 1970
- Posts
- 396
May 11th, 2006 11:13 PM #7prysm, tga san ka pre? kung magkalapit lang tyo, id love to help out in your project. bka kailangan mo ng extra hands. gusto ko din kasi matuto about automotive e.
-
-
Verified Tsikot Member
- Join Date
- Oct 2005
- Posts
- 147
May 12th, 2006 12:05 PM #9Originally Posted by slip-slick
ko ngayon eh so ako na lang.
mag dasal na lang ako na hindi ko masira lalo engine ko hehehe
speedy
baka puwede tumambay sa shop mo para maki-usi??
-
Verified Tsikot Member
- Join Date
- Oct 2005
- Posts
- 147
May 12th, 2006 07:04 PM #10Originally Posted by speedyfix
hmm oo nga baka kailangan na mag oversize ng piston rings.
ok kaya ang plano kung ganito??
Ang plan ko ay check ko muna yung ko how much of the power I can restore without having to remove the engine from the car. kakatakot kasi chain block namin eh panahon pa ng hapon.
eto muna gawin ko
1. check injectors for wear
2. replace air filter di ko alam kung gaano katagal na ito eh
3. fule filter luma na din
4. remove cylinder head kasi par mapalitan ng head gasket meron leak sa bandang joining ng head at block.
5. kalasin ko na rin siguro yung oil pan para mapalitan ng gasket.
6. habang kalas yung head inspect ko kung merong warp or crack sa head or the block(sana wala...)
7. linisin yung head and block surfaces at check na rin kung kalinagnan ng bagong valves.
8. check ko na din siguro yung oil pump kasi parang mabagal mawala yung oil light ko eh at nung nagkabit ako ng oil pressure meter ang bagal umakyat.
9. kung wala naman ako mapansin na problem buoin ko muna para ma test.
meron pa ba ako nakalimutan na puwede ma check without removing the egnine?
,prysm
see my pahabol statement above. i mean, i can go on vacation anytime. but my spouse has her...
Traffic!