kailan kailangan mo ng ipa-overhaul ang engine?

**boy2log** · November 29th, 2003 12:02 PM

hi guys,,,

bago pa lang ako sa tsikot, i know that this is a stupid question anyway i just what to know your comment guys?
kelan b o ano ba ang mga signs na kailangan mo ng ipa-overhaul your engine? my ride is a hilander SLX 98 na isuzu, medyo
blo-bay ( tama b yung term ko )?

thanks a lot

**GlennSter** · November 29th, 2003 12:16 PM

malakas kumain ng diesel

puti na ang usok

mahina na humatak

may lumalabas nang usok na puti sa lalagyan ng oil.

**boy2log** · November 29th, 2003 12:42 PM

Originally posted by GlennSter
malakas kumain ng diesel

puti na ang usok

mahina na humatak

may lumalabas nang usok na puti sa lalagyan ng oil.

malakas pa naman yung hatak! and di pa sya malaks kumain ng krudo? yung puting usok sa tambutso and sa may dip stick lang, wla sa lalagyan ng oil?
san b magandang magpaoverhaul around laspinas, alabang area?

thanks

**yebo** · November 29th, 2003 12:53 PM

blow by.

if you want to check by yourself, pag MALAMIG pa ang engine, open the oil filler plug on top of the valve cover. start the engine and put the palm of your hand over the opening, sealing it with your palm. kaya sabi ko malamig ang engine kasi di mo to pwede gawin pag mainit, mapapaso ka. pag malakas na yung pressure (feel mo naman sa kamay mo e) lalo na kung pag-alis mo ng kamay mo may nakikita ka ng oil mist na bumubuga dun sa oil fill, blow by na yan. you can then have a compression test done to confirm. pero not all service shops have compression testers.

**vinj** · November 29th, 2003 01:57 PM

IMO, the a few sure-shot ways is to check following:
- oil consumption
- smoke (with diesels, this may have different resons though like dirty fuel systems, etc...)
- oil mixing with water/cooling system
- do a compression test (this is one sure shot way)

**buknoy2002** · November 29th, 2003 02:41 PM

san pde pa compression test? mahal ba yon?

**boy2log** · November 29th, 2003 03:45 PM

pag nag-adjust b ako ng valve clearance masosolve by yung problema(blow-by)?

**OTEP** · November 29th, 2003 04:07 PM

Sa Betan Calibration ni Doc Diesel pwede ang compression testing. Pero dapat cold engine na.

**Ungas** · November 29th, 2003 07:16 PM

boy2log::: Valve clearance adjustment will not help either. And you should not tamper with its original settings.

**pajerokid** · November 30th, 2003 08:13 PM

A Blown engine will require an overhaul to fix.

Heto sure ball test. Pag nauubos ang engine oil mo, lets say, you have to add a Liter of engine oil a week, hayun, pa-overhaul ka na.