New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Results 1 to 14 of 14
  1. Join Date
    Nov 2003
    Posts
    5
    #1
    hi guys,,,

    bago pa lang ako sa tsikot, i know that this is a stupid question anyway i just what to know your comment guys?
    kelan b o ano ba ang mga signs na kailangan mo ng ipa-overhaul your engine? my ride is a hilander SLX 98 na isuzu, medyo
    blo-bay ( tama b yung term ko )?

    thanks a lot

  2. Join Date
    Oct 2002
    Posts
    6,794
    #2
    malakas kumain ng diesel

    puti na ang usok

    mahina na humatak

    may lumalabas nang usok na puti sa lalagyan ng oil.

  3. Join Date
    Nov 2003
    Posts
    5
    #3
    Originally posted by GlennSter
    malakas kumain ng diesel

    puti na ang usok

    mahina na humatak

    may lumalabas nang usok na puti sa lalagyan ng oil.

    malakas pa naman yung hatak! and di pa sya malaks kumain ng krudo? yung puting usok sa tambutso and sa may dip stick lang, wla sa lalagyan ng oil?
    san b magandang magpaoverhaul around laspinas, alabang area?

    thanks

  4. Join Date
    Oct 2002
    Posts
    10,819
    #4
    blow by.

    if you want to check by yourself, pag MALAMIG pa ang engine, open the oil filler plug on top of the valve cover. start the engine and put the palm of your hand over the opening, sealing it with your palm. kaya sabi ko malamig ang engine kasi di mo to pwede gawin pag mainit, mapapaso ka. pag malakas na yung pressure (feel mo naman sa kamay mo e) lalo na kung pag-alis mo ng kamay mo may nakikita ka ng oil mist na bumubuga dun sa oil fill, blow by na yan. you can then have a compression test done to confirm. pero not all service shops have compression testers.

  5. Join Date
    Oct 2002
    Posts
    17,338
    #5
    IMO, the a few sure-shot ways is to check following:
    - oil consumption
    - smoke (with diesels, this may have different resons though like dirty fuel systems, etc...)
    - oil mixing with water/cooling system
    - do a compression test (this is one sure shot way)

  6. Join Date
    Jan 2003
    Posts
    973
    #6
    san pde pa compression test? mahal ba yon?

  7. Join Date
    Nov 2003
    Posts
    5
    #7
    pag nag-adjust b ako ng valve clearance masosolve by yung problema(blow-by)?

  8. Join Date
    Oct 2002
    Posts
    22,658
    #8
    Sa Betan Calibration ni Doc Diesel pwede ang compression testing. Pero dapat cold engine na.

    http://docotep.multiply.com/
    Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.

  9. Join Date
    Oct 2002
    Posts
    10,942
    #9
    boy2log::: Valve clearance adjustment will not help either. And you should not tamper with its original settings.

  10. Join Date
    Oct 2002
    Posts
    10,603
    #10
    A Blown engine will require an overhaul to fix.

    Heto sure ball test. Pag nauubos ang engine oil mo, lets say, you have to add a Liter of engine oil a week, hayun, pa-overhaul ka na.

  11. Join Date
    Oct 2002
    Posts
    34
    #11
    kung hindi 1 liter per week ang kinakaing oil, sigruo 1 liter every 2 months, okay lang ba i delay muna ang pag pa overhaul? what are the consequences kung due ka na for overhaul pero hindi mo pina overhaul? thanks in advance!

  12. Join Date
    Oct 2002
    Posts
    10,603
    #12
    Kung 1 liter every 2 months, oks pa yun. Im not sure lang, pero lalala lang ata yung symptoms pag di mo pinagawa.

  13. Join Date
    Nov 2002
    Posts
    2,059
    #13
    oil consumption in engines can be attributed to a lot of causes. it may be valve seals, leaky gaskets sa crankshaft, oil pan or other outlets. if valve seals this may give off white smoke also expecially during startups and when the engine is cold but would disappear once hot. to make sure pa compression test mo na lang. hindi mo pa ba na valve set ang hilander mo since brand new? dapat at least once a year ito ang tune up ng diesel.

  14. Join Date
    Oct 2002
    Posts
    17,338
    #14
    Yep, compression testing will help determine what exactly can be the problem (i.e. wet and dry testing)...

kailan kailangan mo ng ipa-overhaul ang engine?