Results 1 to 7 of 7
-
February 4th, 2015 11:57 PM #1
Guys what is the possible cause ng pag shake ng kanina during Idle? But after the AC compressor kicks in the engine speed will climb a little (800RPM-900RPM) then when the AC compressor disengaged mag shake na naman sya.konti lang naman Pero medyo ramdam sa cabin since under the seats yung engine nya.thanks
-
-
Verified Tsikot Member
- Join Date
- Nov 2008
- Posts
- 641
February 6th, 2015 09:33 AM #3Check your idling setting, it should be between 700 to 800 rpm. Also better check your engine supports, if they're busted or very old, they tend to be very stiff, failure to absorb or dampen the engine vibrations.
-
February 6th, 2015 10:44 AM #4
if your car's idling is at around 700-800 at no aircon, it will vibrate... masyadong mababa..... ideal RPM with no ac should be at around 850.... pag naka AC around 900.
-
-
-
February 12th, 2015 01:02 PM #7
just increase your idle speed and it will be fine. ok naman pala ang idle up mechanism.
Did some independent research and decided to go with the white pearl crystal.... para maiba naman. ...
Toyota Innova Owners & Discussions [continued...