Results 1 to 3 of 3
-
June 25th, 2013 02:10 PM #1
Guys Has anyone here done any modification on their crankcase ventilation system primarily diesel engines? Like slash cut exhaust pcv
Im planning on doing this but im not quiet so sure where can i buy a check valve..
Your opinions and suggestions are welcome.
-
June 25th, 2013 06:03 PM #2
the gas flow of PCV systems start from filtered ambient air, goes into the crankcase, mixes the ambient air with blowby gases and fumes of engine oil vapors inside the crankcase, pulled into the intake system and the blowby gases diluted with air and oil fumes are introduced into the combustion chambers to be oxidized. the fumes do not go straight to the exhaust pipes
-
Verified Tsikot Member
- Join Date
- Oct 2004
- Posts
- 278
June 27th, 2013 06:49 AM #3Venting blow-by gases via the exhaust pipe is exactly the same as venting the blow-by gases directly into atmosphere.
Just add oil catch bin to your stock PCV routing.
Hybrids and EV