New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 1 of 3 123 LastLast
Results 1 to 10 of 26
  1. Join Date
    Jun 2010
    Posts
    227
    #1
    Hard break-in or Soft break-in? May advantage ba talaga pag hard break-in?

  2. Join Date
    Jul 2013
    Posts
    593
    #2
    i tried both. mas effective yun hard break in. pero hanggang 100 kph lang. masgumanda performance ng makina compare dun sa soft break in.

  3. Join Date
    Apr 2012
    Posts
    3,469
    #3
    I don't believe in soft break in.
    Ako pagka lagpas ng 100 kms hataw na. Kahit lagpas 100kph

  4. Join Date
    Dec 2006
    Posts
    17,314
    #4
    I drive the car normally. No use babying the car. Just follow the manual.

    No unnecessary hard acceleration, don't stay at one speed for extended periods of time.

    For the first 300 km I try not to go past 4000 rpm. Until around 800 km I didn't push the car to redline, but I gradually accelerate to about 160 kph. From 800-1000 I pushed a little more but not sustained speeds. After 1000 km PMS yung totoong hataw na top speed for extended periods.
    Last edited by jut703; July 11th, 2015 at 10:49 AM.

  5. Join Date
    Mar 2004
    Posts
    10,280
    #5
    Plus ... avoid sudden starts and stops. Don't overload, avoid going steep uphill with heavy load.

  6. Join Date
    Oct 2010
    Posts
    2,639
    #6
    Quote Originally Posted by jut703 View Post
    I drive the car normally. No use babying the car. Just follow the manual.

    No unnecessary hard acceleration, don't stay at one speed for extended periods of time.
    ditto

    too short

  7. Join Date
    Jul 2015
    Posts
    27
    #7
    Bro what i can advice is to read the owner's manual. Follow what is written and your car will be fine. That is your best bet and one of the most important thing that a new car owner failed to do. Wag ka masyado ma overwhelmed sa advice ng iba since not everyone is the same. Some may work for others car but it doesn't mean it'll work for your car.

  8. Join Date
    Jan 2015
    Posts
    4,580
    #8
    ^well, if it's the same engine, same car and all, then what works for the gander also works for the goose. and experience is the best teacher. that's why we are here sharing our experiences.

  9. Join Date
    Dec 2006
    Posts
    17,314
    #9
    Quote Originally Posted by Juando View Post
    Bro what i can advice is to read the owner's manual. Follow what is written and your car will be fine. That is your best bet and one of the most important thing that a new car owner failed to do. Wag ka masyado ma overwhelmed sa advice ng iba since not everyone is the same. Some may work for others car but it doesn't mean it'll work for your car.
    All cars I've owned gave the same advice for breaking in the vehicle. These aren't car-specific tips, these are general guidelines for any new car.

  10. Join Date
    Apr 2014
    Posts
    473
    #10
    Quote Originally Posted by Juan Martinez View Post
    ^well, if it's the same engine, same car and all, then what works for the gander also works for the goose. and experience is the best teacher. that's why we are here sharing our experiences.
    Sa case ko simple lang yung instructions sa manual, keep revs between 2-3k, no towing, or racing the engine.

    - - - - - - - - - - - - - - - - - - - - - -

    Quote Originally Posted by Juan Martinez View Post
    ^well, if it's the same engine, same car and all, then what works for the gander also works for the goose. and experience is the best teacher. that's why we are here sharing our experiences.
    Sa case ko simple lang yung instructions sa manual, keep revs between 2-3k, no towing, or racing the engine.

Page 1 of 3 123 LastLast

Tags for this Thread

Break-in technique?