Results 1 to 10 of 14
Hybrid View
-
October 20th, 2006 09:00 AM #1
I'm planning of installing 3 gauges in the left-side PILLAR of my DMAX. It will include battery voltage, turbo boost (psi) and oil pressure (if applicable). Any recommended shop anyone sa metro-manila area. Ung shop na may ready-made na housing-pod para hindi na mismong dun pa gagawin. Para installation na lang. Ung ibang shop kasi dun pa lang gagawa ng molde and baka hindi masyadong pulido pa ung gawa, so baka magka-back job pa. Thanks..
-
October 20th, 2006 07:21 PM #2
sir ako nga din yan yung problem ko kung saan makakabili nung pillar gauge kasi po gusto din namin pakabitan yung strada and adventure namin yung lang po sana may makatulong po samin dito sa tsikot
-
October 21st, 2006 12:06 AM #3
nako mahihirapan ka para sa dmax mo. best bet is magpasadya ka talaga kasi bihira ang aftermarket parts ng dmax.
-
October 21st, 2006 12:52 AM #4
Most of the time pasadya din naman yan pre, they're not that hard to make kung pumunta ka sa mga fiberglass manufacturers... All they need is to mold your stock pillar and the gauge size...
-
October 21st, 2006 01:28 AM #5
pero bubutasin yung pillar mo para makadaan yung lines/hoses para sa boost gauge and oil pressure gauge. kaya ginagawa ng iba, bumibili ng surplus pillar para pag ayaw na mag pillar gauge pod, pwede ibalik sa stock and voila, walang butas.
-
October 21st, 2006 07:51 AM #6
wala pa siguro surplus na pillar ng DMAX. ano kaya an reputable shop na gumagawa nito? A-TOY isa sa alam ko, kaso sobrang mahal naman ang magpagawa nun. what nga pala magandang BRAND ng GAUGES? as much as posssible gusto ko ung US or japan made, puede rin european made. ayaw ko kasi ng mga china brand eh. hehe. madaling masira kasi..
iyong honda city 1st gen (sx8 chassis code) mukhang pasok sa budget. based siya sa older model...
Civic ESi vs E36 320i vs Corolla Bigbody - First...