ngninig engine when all accesories on

**dr. d** · March 30th, 2014 09:23 AM

Originally Posted by James Baviera

900 no a/c, 1000 with a/c... anything below 900 nanginginig na makina kaya di ko na binabaan

ibig mong sabihin, tinaas mo ang idling speed mo dahil nanginginig nga siya?
if your idle up is working, you wouldn't have to tinker with your idling rpm setting.

rpm drops when braking? sounds like your idle air bleed screw is too tight. this might also be the reason for the nginig.. open her up by 1/2 to 3/4 turn counterclockwise.. but if there is no improvement, ibalik mo sa original setting, para isa-isa mong ma-shoot the trouble..

**James Baviera** · March 30th, 2014 01:41 PM

Originally Posted by dr. d

ibig mong sabihin, tinaas mo ang idling speed mo dahil nanginginig nga siya?
if your idle up is working, you wouldn't have to tinker with your idling rpm setting.

rpm drops when braking? sounds like your idle air bleed screw is too tight. this might also be the reason for the nginig.. open her up by 1/2 to 3/4 turn counterclockwise.. but if there is no improvement, ibalik mo sa original setting, para isa-isa mong ma-shoot the trouble..

saan po nakikita eto sa 2e?

**ronskiee** · April 8th, 2014 11:12 AM

Originally Posted by dr. d

ibig mong sabihin, tinaas mo ang idling speed mo dahil nanginginig nga siya?
if your idle up is working, you wouldn't have to tinker with your idling rpm setting.

rpm drops when braking? sounds like your idle air bleed screw is too tight. this might also be the reason for the nginig.. open her up by 1/2 to 3/4 turn counterclockwise.. but if there is no improvement, ibalik mo sa original setting, para isa-isa mong ma-shoot the trouble..

ganito po ang problem ko e, bumababa ang rpm pag umapak ng brake.. noticeable sya pag ung tipong stop and go ang traffic at nakaalalay sa brake kc AT po ung oto. paano po ba iadjust un? kasi po sa dami ng mechanic na napagsabihan ko ng prob ko, ni isa sa kanila wlang naka resolve.. kesyo bka engine support daw, pero pag check ng engine support buo naman. so after that, wla na silang ibang maisip.

**ronskiee** · April 8th, 2014 11:33 AM

Originally Posted by dr. d

ibig mong sabihin, tinaas mo ang idling speed mo dahil nanginginig nga siya?
if your idle up is working, you wouldn't have to tinker with your idling rpm setting.

rpm drops when braking? sounds like your idle air bleed screw is too tight. this might also be the reason for the nginig.. open her up by 1/2 to 3/4 turn counterclockwise.. but if there is no improvement, ibalik mo sa original setting, para isa-isa mong ma-shoot the trouble..

dr.d, ask ko lng po kung nagse-service kayo? ipatono ko sana ang auto ko sau, prang wala kasi sa tono. i have lot of issues on idling