New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Results 1 to 16 of 16

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. Join Date
    Oct 2002
    Posts
    29,354
    #1
    Have you checked if the sparkplugs are gapped properly?

    I assume you had your Kia Rio checked with regards to this problem and the mechanics can't find the cause at the Kia casa?

    Have you tried visiting service shops like SPEEDYFIX or SPEEDLAB for their mechanics to diagnose the problem for you?

  2. Join Date
    Jan 2009
    Posts
    6,452
    #2
    I though pumping the gas pedal prior to starting only works in carbureted engines?

  3. Join Date
    Sep 2006
    Posts
    227
    #3
    *oj88
    - yup...I thought so,too...I did it just out of frustration and surprisingly, it worked....

    *GH
    - you got it right there....the casa says that they can't find the problem even after connecting their diagnostic tools.. I specifically told them to let the ride idle overnight or after 5hours....I doubt they followed that.....they just told me that they re-gapped and cleaned the sparkplugs.....it worked for a month then the problem came back....
    As for the speedyfix and speedylab, unfortunately, we don't have those
    shops here in Cebu.

  4. Join Date
    Jul 2007
    Posts
    276
    #4
    try replacing the spark plugs with the better platinum plugs since when they re-gapped and cleaned your plugs it went ok

    if it fails have your starter and ignition coil checked

  5. Join Date
    Aug 2004
    Posts
    22,702
    #5
    It's usually the starter or the coils... very rarely will it be the high tension wires.

    Ang pagbalik ng comeback...

  6. Join Date
    Jan 2009
    Posts
    6,452
    #6
    Another cause for hard starting with the engine cold is when the A/F ratio is too lean. If the car is equipped with an EGR valve, have it checked if it is closing properly.

  7. Join Date
    Sep 2004
    Posts
    2,975
    #7
    My guess is its either starter or the starter solenoid.

High Tension Wire question