Results 1 to 8 of 8
-
June 7th, 2010 11:45 PM #1
Hi. Meron ba sa inyo may idea / background sa ganitong klase ng business. not necessarily AutoCAD ung tinuturo. kahit ibang computer training center.
Matagal ko na kasi gusto magkaroon ng AutoCAD training center. kahit isang maliit na kwarto lang with 6 to 7 computer units. Kaso mejo complicated kasi kelangan unang una licensed ung AutoCAD software. so dun palang parang mabigat na ang gastos.
Risky ba kung for the time being (mga 6mos), mag "colorum" muna. un bang pirated software muna then pag lumakas, saka bumili ng licensed software. Kelangan din kasi ng certificates na ibibigay sa mga naka complete ng course.
Mejo may demand din kc sa autocad. Di lang naman architects ang gumagamit nito. Pati engineers.
Any comments/suggestions naman.
Thanks in advance
-
-
June 8th, 2010 02:35 PM #3
Yes indeed...you need to contact the Autodesk and ask about the software if you are planning to open a training center. As far as I know, there is a software version intended only for educational / training purpose but lack some of the function introduce from the genuine Version.
-
June 9th, 2010 09:44 AM #4
salamat sa replies. kung pirated software muna ang gagamitin ba, anu ung penalty pag nahuli?
-
June 10th, 2010 11:41 AM #5
there is supposed to be a Php1,000,000.00 reward to a tipster of pirated softwares. so watch out... maybe your students will call you out!
it's your choice! for penalties and prison terms see:
papt.org.ph
-
June 10th, 2010 02:39 PM #6
-
Tsikot Member
- Join Date
- Sep 2010
- Posts
- 1
September 7th, 2010 02:33 PM #7Sir pwede ko offer sau space ko its along the road, with 4 existing computer. Open ako sa business negotiations. Matagal ko na din gustong gawing training center itong computer shop ko, wala lang me makuha partner.
baka pwede na ito for starter plang text me or email me here is my contact no:
email : joel_ogcila*yahoo.com
mobile: 09284558871
looking forward to your reply! thanks.
Joel
-
Verified Tsikot Member
- Join Date
- Jan 2009
- Posts
- 121
September 7th, 2010 03:39 PM #8You can purchase a student version of Autocad. It is much cheaper and used for teaching autocad.It is time based and every printout, a watermark will be printed also. This is good for training purposes. Google nyo nalang.
Puwede i try, 1. Palit air filter 2. Linis throttle body 3. Linis MAF sensor 4. Check spark...
high idle RPM at engine start