Back-up Sensors

[Retz]

^

pwede pala mag caused ng unusual continuos beep pag madumi sensor.

[ZENMasterTYL]

kaya bang ma detect nung sensor kapag naka perpendicular yung object sa bumper?

[stavros]

kaya bang ma detect nung sensor kapag naka perpendicular yung object sa bumper?

Basta nasa range ng sensor kaya.

[ZENMasterTYL]

Basta nasa range ng sensor kaya.

pansin ko kasi, walang problema pag mga poste or pader. pero yung kunyari tubo na nakausli, di nya ma detect

[Retz]

^

depende din sa height ng object pag mababa hindi rin ma detect.

[armscor40]

^

pwede pala mag caused ng unusual continuos beep pag madumi sensor.

it can sir based in my experience kasi wala naman obstacle whatsoever everytime i reverse at backing start-up lang ginawa ko then yun na nagloko na sya i thought many things including malfunction module or defective sensor but totoo na simple clean dry lang good working condition na ulit na wala naman masama if gagawin natin coz some members of our forum personally done it...at least from simple procedure nagawa sir instead of having it check sa mga alaktrician dyan hehehe

[stavros]

pansin ko kasi, walang problema pag mga poste or pader. pero yung kunyari tubo na nakausli, di nya ma detect

Kaya hindi kaya madetect dahil very small lang yung item for the radio waves to bounce back to the sensor.

[ZENMasterTYL]

Kaya hindi kaya madetect dahil very small lang yung item for the radio waves to bounce back to the sensor.

tingin ko din, sa point of view ng sensor parang dot lang sya

[amalgam102]

ok lng ba pinturahan yung sensor para match sa body color?, or baka kasi humina siya.. thanks

[dfopiso]

These past few days, yung back-up sensors ko hindi properly working dahil siguro nagka-moisture from baha. Nakaka sense lang sya pag really close na, as in continuous na yung beeping sound. So binilad ko auto kahapon dahil maaraw na. Today, parang ok na ulit, though hindi pa bumabalik yung intermittent beeping

[dfopiso]

ok lng ba pinturahan yung sensor para match sa body color?, or baka kasi humina siya.. thanks

You mean yung bumper ang ipa-body color mo, hindi mismo yung sensors?

[ZENMasterTYL]

ok lng ba pinturahan yung sensor para match sa body color?, or baka kasi humina siya.. thanks

may mga sensor na hindi pwede pinturahan dahil may effect sa sensitivity. sa labas mo ba pinakabit o sa casa?

[Retz]

it can sir based in my experience kasi wala naman obstacle whatsoever everytime i reverse at backing start-up lang ginawa ko then yun na nagloko na sya i thought many things including malfunction module or defective sensor but totoo na simple clean dry lang good working condition na ulit na wala naman masama if gagawin natin coz some members of our forum personally done it...at least from simple procedure nagawa sir instead of having it check sa mga alaktrician dyan hehehe

Will take note of that sir. Hindi ko naman na encounter na nag malfunction sensor ko so far eh hindi ko naman nalilinis un. hehe

[Retz]

ok lng ba pinturahan yung sensor para match sa body color?, or baka kasi humina siya.. thanks

hmm... may nakikita akong brand new vehicle na match ung sensor sa body color maybe stock na ito or casa installed.

[jaggerx3]

Eto nagustuhan ko sa Back-up sensors namin. Hindi kulay black. Hehe

[dfopiso]

sabi sa owner's manual, even moisture can lower the sensitivity of the sensors

[Retz]

Eto nagustuhan ko sa Back-up sensors namin. Hindi kulay black. Hehe

yan sinasabi ko. stock yan sir?

[ZENMasterTYL]

Eto nagustuhan ko sa Back-up sensors namin. Hindi kulay black. Hehe

factory installed yan.

OT: baka mapasama to dito
http://tsikot.com/forums/goon-squad-.../index233.html

[jaggerx3]

factory installed yan.

OT: baka mapasama to dito
http://tsikot.com/forums/goon-squad-.../index233.html

Hehe, pinark muna sa tabi yan sir. Ipapasok kasi dun sa garage ng Hancars dahil ippa check. Nakuhaan ko sakto. Paatras po yan sir. Naka on reverse lights. Hehe

[jaggerx3]

yan sinasabi ko. stock yan sir?

Yes sir. May ganyan na talaga nung pagkuha namin sa Hancars. Yung HVX model nila yung may body claddings, kung anung kulay ng claddings nila ganun din kulay ng sensor. Kapag nagpakabit din kami ng claddings, ganyan pa rin style nung sensor niya. Hindi naka angat. Hehe.