New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14
  1. Join Date
    Jun 2015
    Posts
    2,751
    #11
    Make sure you know how the alarm works. It should be enabled already. Then how to set to valet mode. How to temporarily disable. Is it olay to lock the doors before starting the engine?

    I'm assuming owners of mitsubishi cars know why this should be asked.

  2. Join Date
    Mar 2008
    Posts
    52,700
    #12
    i make sure the spare tire and the tools for flat tire replace, are in the car.
    i make sure the car is already adequately insured. "unbelievable kuwento from an office colleague."
    i make sure all fluids are adequate.

  3. Join Date
    May 2018
    Posts
    157
    #13
    Appreciate the replies, mga sirs!
    Very helpful lalo na sa first owner na tulad ko.
    Salamat!

  4. Join Date
    Mar 2017
    Posts
    7
    #14
    Quote Originally Posted by benchph1 View Post
    Check for all functionality.
    Head Lights, parking lights, interior lights, signal lights, hazard lights
    Door locks, keyless entry, alarm
    Doors, hood, trunk operation
    Tire inflation

    Spare tire, basic tools, EWD, owners manual, manufacturers warranty booklet, warranty certificate for others like tires & battery (kasi usually hiwalay ito)

    Start the engine. Listen for squeaking or rattling noises, turn on the ac. See if it gets cold.

    I guess thats all you can do before you can bring the car out of the dealer. Now after you take the car home, use it as much as possible to expose the car to a real-world scenario. Stop and go traffic, highway driving and all.

    Anything out of the ordinary bring the car straight back to the dealer


    Sent from my iPhone using Tapatalk
    1 year na unit ko ngaun ko lang napansin walang EWD. May habol pb ako?

Page 2 of 2 FirstFirst 12

Tags for this Thread

taking out the unit from the dealership (what things to check sa car)