simple question about AMP Setup

**jojan** · July 10th, 2007 10:01 AM

I have a new project car...

I have Kicker 2 L712 dual voice coil 2/4oms
750rms Minimumum and 1500rms Max

and a profile ca1200 with 2 channels...
AMP Specs:
300 watts RMS x 2 at 4 ohms
450 watts RMS x 2 at 2 ohms
900 watts RMS x 1 bridged output at 4 ohms
4-ohm stable in bridged mode
stereo or bridged mono output

I know that the amp is underpowered for the L7s..

The question...
If I bridge the the AMP it will give me 900 watts RMS in 4oms power or lower. so I get atleast the minimum rms for the SUBs.

Now would it be better if I series the two SUBs for it? or just use the two channels for the SUBs.

Thus: two chnneling the AMP will only give me 450rms of power that is below the rms required for each SUB...

Thanks...

**userfriendly** · July 10th, 2007 04:27 PM

Go with one sub, bridge your amp. That setup will be pretty loud, just make sure you have a well made box for it.

**funkngruvn** · July 10th, 2007 09:17 PM

Originally Posted by jojan

I have a new project car...

I have Kicker 2 L712 dual voice coil 2/4oms
750rms Minimumum and 1500rms Max

and a profile ca1200 with 2 channels...
AMP Specs:
300 watts RMS x 2 at 4 ohms
450 watts RMS x 2 at 2 ohms
900 watts RMS x 1 bridged output at 4 ohms
4-ohm stable in bridged mode
stereo or bridged mono output

I know that the amp is underpowered for the L7s..

The question...
If I bridge the the AMP it will give me 900 watts RMS in 4oms power or lower. so I get atleast the minimum rms for the SUBs.

Now would it be better if I series the two SUBs for it? or just use the two channels for the SUBs.

Thus: two chnneling the AMP will only give me 450rms of power that is below the rms required for each SUB...

Thanks...

lakas naman ng amp mo tol.. yan ba yung nasa classifieds na 4 sale?

**zackieee** · July 24th, 2007 04:23 AM

Originally Posted by userfriendly

Go with one sub, bridge your amp. That setup will be pretty loud, just make sure you have a well made box for it.

Plus +1

**co_nixz** · July 24th, 2007 04:42 AM

Originally Posted by userfriendly

Go with one sub, bridge your amp. That setup will be pretty loud, just make sure you have a well made box for it.

+2

Lkas nga ng amp mo ^_^ ako EFX 600W/Channel Max...

Suggest ko Isa nlang gamitin mo just make a good box SLOT PORTED will be very good.

Pag dalawa IIYAK na BATTERY at ALTERNATOR MO!