Results 1 to 10 of 16
-
July 5th, 2005 10:11 AM #1
may pinuntahan ako car audio shop sabi nya hanap lang ako ng cable ng cd changer tapos sya na daw bahala magpapalit ng input rca nya...
pwede ba yon?
ang mahal kasi ng cd rb10 1.8k to 2k
basta hanapin ko lang daw yung color blue dito sa picture...
same din daw ito sa mga cd changers ng pioneer...
may nakagawa na po ba nito? DIY? any diagram...tnx
-
-
July 7th, 2005 08:18 AM #3
been there done that
that is why I am askin, boyLast edited by Jeepcruizerph; July 7th, 2005 at 08:23 AM.
-
BANNED BANNED BANNED
- Join Date
- Oct 2002
- Posts
- 3,790
July 13th, 2005 02:22 PM #4I haven't done that pero palagay ko cable lang nga yun. What he needs it the adaptor (blue) to fit your HU. Do you still have the schematic diagram ng HU mo?
-
BANNED BANNED BANNED
- Join Date
- Oct 2002
- Posts
- 3,790
July 13th, 2005 03:02 PM #5this might solve your problem dude:
and here is the web page
http://users.tpg.com.au/johnkg/skyli...eer/index.html
-
-
July 14th, 2005 11:56 AM #7
Sir wildthing just a follow up question for the RCA jack..
which is negative and positve for the rca jack?
inside ba negative and outside metal is positive?
tama po sir or baligtad?
THANK YOU VERY MUCH!!!
-
BANNED BANNED BANNED
- Join Date
- Oct 2002
- Posts
- 3,790
July 14th, 2005 11:18 PM #8baligtad. Ground ang outside..normally kung ano ung prone maexpose sa labas ay ground...pinoprotektohan ung positive kaya nasa loob. To be doubly sure, also try asking the electronic store where you plan to buy your rca jack/plugs about the right polarity ng RCA.
Last edited by wildthing; July 14th, 2005 at 11:25 PM.
-
July 17th, 2005 10:18 AM #9
oh ic thank you very much sir
hunting muna ako ng ip bus connector tom monday... ;)
-
BANNED BANNED BANNED
- Join Date
- Oct 2002
- Posts
- 3,790
July 17th, 2005 08:44 PM #10kung wala kang makuha, I would suggest DIYing a plug that would be directly plug into the back of the HU. Some electronic stores (like Alexan or Deeco) might have a "pole" plug (gawa ito sa copper) that might fit the prongs in the back of your HU. Then para hindi ito mag ground sa nearby prongs you can cover it with a "spaghetti" protector or a "shrink-wrap" wire protector (electronic store might also have these- yun shrink wrap naman uso sa R/C hobbyist stores). Goodluck sa project mo.
Choice I would have made as well.:nod:
2024 Innova Zenix 2.0 V CVT (non-HEV) vs Innova...