Usapang PINTURA

[bercandal]

Yan ang problem sa freelance, ung downpayment mo malamang sa personal expenses nya mapunta lalo na kung matagal siyang nabakante at syempre lalo na at dumaan ang gastusan ng pasko at bagong taon, check mo baka kumuha na yan ng ibang trabaho dahil baka halos bayad ka na at wala na siya kikitain sau

Tama ka sir sa sinabi mo, first time ko kasing magpapintura ng sasakyan, kaya di ko masyado alam ang kalakaran sa ganito. Ngayon nasa garahe yung kotse, I am thinking na dito ko na lang papipinturahan yung kotse ko or ako na lang siguro ang gagawa nito para pagsanayan ko na lang magpintura basta meron mag guide sa akin. I am relying in this forum na sana matulungan ako kung ano ang dapat kong gawin sa kotse ko.

[zaoldyeck17]

Hi mga sir!

I'm new here, magask lang po, what can you suggest po dito sa pamana sa akin ng erpat ko na car? balak ko po gawin siya na evo sa future, dahil wala pa budget, paisa isa muna ipapagawa ko.. magtanong lang s inyo mga sir, ano po ang first move ko dito. thanks in advance sir! God bless!

Sent from my MI PAD 4 using Tapatalk

[ninjababez]

Hi mga sir!

I'm new here, magask lang po, what can you suggest po dito sa pamana sa akin ng erpat ko na car? balak ko po gawin siya na evo sa future, dahil wala pa budget, paisa isa muna ipapagawa ko.. magtanong lang s inyo mga sir, ano po ang first move ko dito. thanks in advance sir! God bless!

Sent from my MI PAD 4 using Tapatalk

baka mas maganda unahin mo yun pag upgrade sa kanya
since you mentioned gusto mo maging evo sya. malamang magdagdag ka ng mga body kits na pipinturahan mo rin. unahin mo na yun, tska mo na papinturahan para isang gawaan nalang.

Sent from my MI MAX 3 using Tapatalk

[yapoy86]

Hanapin mo muna yung pang Evo kit mo.. kasi baka mahirapan ka humanap ng buo...

Otherwise restore to stock form ka muna.. mas ok yun lalo na sa ganyan.. yung tipong parang brand new ang dating

[zaoldyeck17]

Hanapin mo muna yung pang Evo kit mo.. kasi baka mahirapan ka humanap ng buo...

Otherwise restore to stock form ka muna.. mas ok yun lalo na sa ganyan.. yung tipong parang brand new ang dating

hmmm.. tama sir, pakinisin ko muna, [emoji4]
thanks sir!

Sent from my MI PAD 4 using Tapatalk

[zaoldyeck17]

baka mas maganda unahin mo yun pag upgrade sa kanya
since you mentioned gusto mo maging evo sya. malamang magdagdag ka ng mga body kits na pipinturahan mo rin. unahin mo na yun, tska mo na papinturahan para isang gawaan nalang.

Sent from my MI MAX 3 using Tapatalk

Hmmm. noted sir! thank you! [emoji4][emoji106]

Sent from my MI PAD 4 using Tapatalk

[uls]

Hi mga sir!

I'm new here, magask lang po, what can you suggest po dito sa pamana sa akin ng erpat ko na car? balak ko po gawin siya na evo sa future, dahil wala pa budget, paisa isa muna ipapagawa ko.. magtanong lang s inyo mga sir, ano po ang first move ko dito. thanks in advance sir! God bless!

Sent from my MI PAD 4 using Tapatalk

sure po kayo gagwin mo evo yan?

as in 4g63 turbo, front mount intercooler and all?

o evo look lang?

[zaoldyeck17]

sure po kayo gagwin mo evo yan?

as in 4g63 turbo, front mount intercooler and all?

o evo look lang?

evo look lang pala sir, hehe


Sent from my MI PAD 4 using Tapatalk

[zaoldyeck17]

Hi mga sir!

I'm new here, magask lang po, what can you suggest po dito sa pamana sa akin ng erpat ko na car? balak ko po gawin siya na evo sa future, dahil wala pa budget, paisa isa muna ipapagawa ko.. magtanong lang s inyo mga sir, ano po ang first move ko dito. thanks in advance sir! God bless!

Sent from my MI PAD 4 using Tapatalk

Ask lang po mga sir, sa mga taga bulacan dito, san maganda magpagawa? body works at paint, thank you in advance! God bless!

Sent from my MI PAD 4 using Tapatalk

[Archerfish]

Ask lang po mga sir, sa mga taga bulacan dito, san maganda magpagawa? body works at paint, thank you in advance! God bless!

Sent from my MI PAD 4 using Tapatalk

I've heard that the shop near Regina is good. I see a lot of vehicles being repaired, if that is any good indication that it is a good shop.

Another one is the shop along the diversion road of Malolos - Hagonoy. It's a surplus shop but they can entertain you for a whole body repair and paint. That is where I had our CR-V 98 repainted and "tucked in".

[zaoldyeck17]

I've heard that the shop near Regina is good. I see a lot of vehicles being repaired, if that is any good indication that it is a good shop.

Another one is the shop along the diversion road of Malolos - Hagonoy. It's a surplus shop but they can entertain you for a whole body repair and paint. That is where I had our CR-V 98 repainted and "tucked in".

Thank you sir! I'll go try visit those shops soon!

Sent from my MI PAD 4 using Tapatalk

[bercandal]

Mga sir ask ko po about my car, anong ang unang gagawin pagkatos ma scrape ang pintura ng kotse ko?

[travajante]

Rat rod it!!!! Add faux to real rust.[emoji4]

Sent from my SM-G970F using Tapatalk

[zaoldyeck17]

hi there! ask lang ulit, if magpapapaint na ako, what mas okay sa mga rust part, yung latero or fiber glass?

Sent from my MI PAD 4 using Tapatalk

[yapoy86]

hi there! ask lang ulit, if magpapapaint na ako, what mas okay sa mga rust part, yung latero or fiber glass?

Sent from my MI PAD 4 using Tapatalk

Yung latero... di uubra yung fiberglass dyan at mabubutas lang ulit.. cut out rusted parts and put new metal sheet.. mas ok kung MIG welding ang gamit kesa acetylene.. para di masyadong sunog yung metal

[zaoldyeck17]

Yung latero... di uubra yung fiberglass dyan at mabubutas lang ulit.. cut out rusted parts and put new metal sheet.. mas ok kung MIG welding ang gamit kesa acetylene.. para di masyadong sunog yung metal

noted sir! thank you!

if welding sir hindi ba kinakalawang ulit yun?

Sent from my MI PAD 4 using Tapatalk

[dr. d]

if welding sir hindi ba kinakalawang ulit yun?

Sent from my MI PAD 4 using Tapatalk

kakalawangin nga po.
that is why, it has to be painted. to prevent it from rusting again.

[zaoldyeck17]

kakalawangin nga po.
that is why, it has to be painted. to prevent it from rusting again.

yes po, what i mean sa future, doon sya ulit magsstart magkalawangin? depende sa gawa nalng siguro po yun noh?

Sent from my MI PAD 4 using Tapatalk

[dr. d]

hi there! ask lang ulit, if magpapapaint na ako, what mas okay sa mga rust part, yung latero or fiber glass?

Sent from my MI PAD 4 using Tapatalk

cutting away the rusted segments and welding in good metal, is the long-term solution.

fiberglassing it will just make you spend twice.
the first for the fiberglass, and the second, and usually larger expense, to repair the already-grown, much larger segment of rusted metal that the first dis-repair will cause..

[zaoldyeck17]

cutting away the rusted segments and welding in good metal, is the long-term solution.

fiberglassing it will just make you spend twice.
the first for the fiberglass, and the second, and usually larger expense, to repair the already-grown, much larger segment of rusted metal that the first dis-repair will cause..

copy sir! thank you for the response!

Sent from my MI PAD 4 using Tapatalk