New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. Join Date
    Dec 2004
    Posts
    57
    #1
    Is it true that we must use sandblast to remove rust? San meron nito? Yng car kasi ng dad ko puro rust na and needs body repair.

  2. Join Date
    Aug 2004
    Posts
    22,705
    #2
    Sandblasting will take care of superficial rust, but for holes, kailangan nang mag-cut and patch.

    Ang pagbalik ng comeback...

  3. Join Date
    May 2004
    Posts
    3,221
    #3
    IMHO, mas maganda kaso cons outnumber the pros (formost; financially not feasible). btw, we do sandblasting and gritblasting.

  4. Join Date
    Jan 2005
    Posts
    224
    #4
    i've read many restoration articles na sandblasting ginamit nila to remove the rust. Yung mustang namin grabe na ang rust ng mga parts (master cylinder etc). Pero sa body niya hindi naman. Pag dinala ko ba sa restoration shop ito (like for example red65stang's shop), isa-sandblast din nila? I just want to get rid of the rust para mas nakakagana magkalikot under the hood hehehe.

    By the way, magkano ba ito estimate?

  5. #5
    Ano pa bang ibang alternative sa pagtangkal ng rust?

  6. Join Date
    Oct 2002
    Posts
    10,620
    #6
    mano mano steel brush and rust converter...

  7. Join Date
    Dec 2004
    Posts
    57
    #7
    niwde11, kailangan ba dalhin sa inyo yng car? how much kya would it cost? gusto ksi ng dad ko matanggal din mga rust na mdyo nasa singit para d na tlga magkarust after body repair.

  8. Join Date
    May 2004
    Posts
    3,221
    #8
    Quote Originally Posted by beatles
    niwde11, kailangan ba dalhin sa inyo yng car? how much kya would it cost? gusto ksi ng dad ko matanggal din mga rust na mdyo nasa singit para d na tlga magkarust after body repair.
    di pa namin nakakaencounter ng pa-sandblast ng isang kotse. pag nalaman mo price e baka matulala ka. we sandblast/gritblast storage tanks and air pressure coming out is very strong. baka lumubog yung malambot na portion. baka ang nasa isip mo is yung mga binebentan pangsandblast sa mga hardware. di ko pa sya natry pero balak ko subukan. unfortunately, mukhang puro bibigay kagad yung mga binebenta. kung ako sayo, yung suggestion ni kimpoy ang gawin mo. mano mano lalo na dun sa mga singit na portion tapos pag bare metal na, primer kagad. hth.

  9. Join Date
    Dec 2003
    Posts
    11,317
    #9
    yep rust converter does wonders

  10. Join Date
    Oct 2002
    Posts
    3,883
    #10
    yung sinabi ni sir kimps...para mas madali hanap ka sa hardware ng steel brush para sa driller/barena...meron nito sa ace at true value...pagkatapos mo gamitan nitong steel brush para sa barena sundan mo pa ng sandpaper at rust converter...

Page 1 of 3 123 LastLast
Sandblast to remove rust?