Results 1 to 4 of 4
-
September 15th, 2004 07:55 PM #1
Boss;
Ano magandang pang buff?
Mga how much kaya sya and saan pwede bilin?
Yung mura lang sana pero very durable sya and with extended warranty.
Thanks. Pa update naman balak ko bumili this sunday.
-
September 15th, 2004 10:00 PM #2
kuha ka ng mga 6incher na pad... bigat yun mga 8 inchers. nakakangawit hehehe. and its tough to reach ang mga maliit na place and mga singit hehehe. laki kase ng pad. imo, medyo useless yun kasama nya na pang buff - yun puro buhok. ang pinaka ok is yun makita, may maxsell rin na replica ng makita. the maxsell also has a 6 incher.
ok yan if you intend to remove swirls and do some polishing. match it with some pads from megs or from 3m.
-
September 15th, 2004 11:15 PM #3Originally posted by Cardo818
kuha ka ng mga 6incher na pad... bigat yun mga 8 inchers. nakakangawit hehehe. and its tough to reach ang mga maliit na place and mga singit hehehe. laki kase ng pad. imo, medyo useless yun kasama nya na pang buff - yun puro buhok. ang pinaka ok is yun makita, may maxsell rin na replica ng makita. the maxsell also has a 6 incher.
ok yan if you intend to remove swirls and do some polishing. match it with some pads from megs or from 3m.
Saan naman nakakabili nito bro???
Thanks.
-
September 17th, 2004 10:25 AM #4
may nakita ako na maxsell polisher 6 inch sa True Value Rockwell. swak yun 6inch foam pads kase meron sya velcro backing plate.
kung pang buff ng wax(after application) by hand pa rin da best(imo) or kung meron ka makukuha na megs ultimate bonnet pede rin... usually i use the machine for polishing lang. wax application, pede by hand. magastos kase pag by machine and waxes dont need the high speed of machines to get a good result.Last edited by Cardo818; September 17th, 2004 at 10:33 AM.
Puwede i try, 1. Palit air filter 2. Linis throttle body 3. Linis MAF sensor 4. Check spark...
high idle RPM at engine start