Inputs needed: Glass Coating

[jojopad]

how's the application process? parang QD lang ba?

Will try TD muna, need na din paint correction ng car ko - chose TD over ATMT mas mukhang alaga sa TD

Similar to QD, spray wipe then buff. Mejo matapang lang amoy kaya recommended sa well ventilated area i-apply.

[atemple1219]

there are two gtechniq shops in luzon that are authorized. I suggest Detail Manila in Makati. they are on fb. owner si Touie De Rosas. friendly guy. maganda rin shop ni atmt. medyo busy sa carwash kase meron discount with taxis and grab.

Gone and deposited the car today at Detail Manila (DM). More pricey compared to all the other shops I did consider, I still went to DM. And after meeting Touie (the owner I guess, not sure of the spelling of his name) and seeing an actual work done with another car, DM seems good as advertised.

[StockEngine]

Gone and deposited the car today at Detail Manila (DM). More pricey compared to all the other shops I did consider, I still went to DM. And after meeting Touie (the owner I guess, not sure of the spelling of his name) and seeing an actual work done with another car, DM seems good as advertised.

congrats man. meron din ba photo opp after the job? yan yun extra ni donj hehehe. did you get the decal too?

[atemple1219]

congrats man. meron din ba photo opp after the job? yan yun extra ni donj hehehe. did you get the decal too?

Wala kami napagusapan sir na photo ops after nor decals. But if you check DM’s fb page. Yung latest post nya about bnew car na puno ng swirl marks and some holograms due to wrong buffing done by casa before delivery, it’s mine. Hehe

[Mak Letran]

Gone and deposited the car today at Detail Manila (DM). More pricey compared to all the other shops I did consider, I still went to DM. And after meeting Touie (the owner I guess, not sure of the spelling of his name) and seeing an actual work done with another car, DM seems good as advertised.

How much quote sayo sir? Still torn between TD and Optimum, ang layo kasi nila Donj and they don't accept sundays na baka mas matagal pa byahe ka papunta pabalik sa actual service.

[jojopad]

Wala kami napagusapan sir na photo ops after nor decals. But if you check DM’s fb page. Yung latest post nya about bnew car na puno ng swirl marks and some holograms due to wrong buffing done by casa before delivery, it’s mine. Hehe

Kakainis mga casa, ginagawang guinea pig ang mga brand new cars sa auto detailing. Fortunately sa akin mejo konti lang nabawas sa coating, naisalba pa ng Technical Details nung pina ceramic coating ko sa kanila. Kwento pa nga ng TD owner, kinuha nya mismo sa pier yung brand new car niya para sure na hindi magagalaw ng casa yung paint job.

[StockEngine]

Wala kami napagusapan sir na photo ops after nor decals. But if you check DM’s fb page. Yung latest post nya about bnew car na puno ng swirl marks and some holograms due to wrong buffing done by casa before delivery, it’s mine. Hehe

ikaw yun naka black Tesla?

- - - - - - - - - - - - - - - - - - - - - -

How much quote sayo sir? Still torn between TD and Optimum, ang layo kasi nila Donj and they don't accept sundays na baka mas matagal pa byahe ka papunta pabalik sa actual service.

its not so far naman. 75minutes aint bad. sarap din mag drive sa slex.

[Mak Letran]

ikaw yun naka black Tesla?

- - - - - - - - - - - - - - - - - - - - - -



its not so far naman. 75minutes aint bad. sarap din mag drive sa slex.

not on weekdays tho, drove to cabuyao c5 to filinvest almost 2hrs na last wednesday

[StockEngine]

not on weekdays tho, drove to cabuyao c5 to filinvest almost 2hrs na last wednesday

ahh. I went to OI on a weekend nga. traffic was light. though the breakfast restos were pack along slex.

[atemple1219]

How much quote sayo sir? Still torn between TD and Optimum, ang layo kasi nila Donj and they don't accept sundays na baka mas matagal pa byahe ka papunta pabalik sa actual service.

Also considered OI. Same sila na Gtechniq accredited detailer ni DM. Kaso malayo din talaga for me kaya I went to DM na lang. TD is good as well. But my research here and in other sites made me decide to choose Gtechniq over other ceramic coating applications. I got mine for 25k with DM.