New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 200 of 254 FirstFirst ... 100150190196197198199200201202203204210250 ... LastLast
Results 1,991 to 2,000 of 2535
  1. Join Date
    Jul 2015
    Posts
    347
    #1991
    Quote Originally Posted by baludoy View Post
    paano ba magtanggal ng grime sa mga gilid gilid ng car emblem? pearl white kasi iyong car kaya halatang-halata eh
    Just to add sa suggestions ng iba, sometimes dito matagal tanggalin yung dumi, mas lalo na kung matagal na naipon yung dumi Tapos mahirap yung access. if kaya matanggal yung emblem, you will have full access sa dumi, mas madali linisin.

  2. Join Date
    Jul 2015
    Posts
    347
    #1992
    Quote Originally Posted by Dobermaxx99 View Post
    Durability po sir



    San and mag kano po ito sir?
    For wax, I will go with Collinite 476. This may last 4-6 weeks sa condition natin.

    For sealant, based sa mga testing and experiences namin, Klasse twins with 2 coats of KSG will give you better durability compared to Blackfire. Another is Polymer Net Shield, pero for the latter brand baka mahirapan ka mka kuha ng supply, since this is being regulated by the supplier here in the Philippines.

  3. Join Date
    Mar 2015
    Posts
    83
    #1993
    Quote Originally Posted by Kitoy22 View Post
    For wax, I will go with Collinite 476. This may last 4-6 weeks sa condition natin.

    For sealant, based sa mga testing and experiences namin, Klasse twins with 2 coats of KSG will give you better durability compared to Blackfire. Another is Polymer Net Shield, pero for the latter brand baka mahirapan ka mka kuha ng supply, since this is being regulated by the supplier here in the Philippines.
    Sir kitoy, any feedback sa meg's paint protect 365?

  4. Join Date
    Apr 2011
    Posts
    148
    #1994
    Quote Originally Posted by Kitoy22 View Post
    For wax, I will go with Collinite 476. This may last 4-6 weeks sa condition natin.

    For sealant, based sa mga testing and experiences namin, Klasse twins with 2 coats of KSG will give you better durability compared to Blackfire. Another is Polymer Net Shield, pero for the latter brand baka mahirapan ka mka kuha ng supply, since this is being regulated by the supplier here in the Philippines.
    Lagi ko nga po sir nababasa yang Klasse Twins. Saan and how much ba yan sir? parang ang dami na nun sir 3 layers?

  5. Join Date
    Mar 2015
    Posts
    83
    #1995
    Quote Originally Posted by Dobermaxx99 View Post
    Lagi ko nga po sir nababasa yang Klasse Twins. Saan and how much ba yan sir? parang ang dami na nun sir 3 layers?
    Actually sir, 2 layers lang sya. Klasse AIO preps the surface paint and Klasse sealant glaze is the protective sealant. KSG layered on top of KSG is good enough as your LSP. But if you want to layer another wax over the KSG, kahit 1 layer lang ok na then top it with your choice of wax. Note that 12-24 hours ang curing time ng KSG before you add another layer of protection.
    PM sir ginnova here in tsikot for the stocks.

  6. Join Date
    Apr 2011
    Posts
    148
    #1996
    Quote Originally Posted by DarkMatter View Post
    Actually sir, 2 layers lang sya. Klasse AIO preps the surface paint and Klasse sealant glaze is the protective sealant. KSG layered on top of KSG is good enough as your LSP. But if you want to layer another wax over the KSG, kahit 1 layer lang ok na then top it with your choice of wax. Note that 12-24 hours ang curing time ng KSG before you add another layer of protection.
    PM sir ginnova here in tsikot for the stocks.
    Ahh gets sir! Thank you very much! mukang paguran pala yan

    - - - - - - - - - - - - - - - - - - - - - -

    Quote Originally Posted by DarkMatter View Post
    Actually sir, 2 layers lang sya. Klasse AIO preps the surface paint and Klasse sealant glaze is the protective sealant. KSG layered on top of KSG is good enough as your LSP. But if you want to layer another wax over the KSG, kahit 1 layer lang ok na then top it with your choice of wax. Note that 12-24 hours ang curing time ng KSG before you add another layer of protection.
    PM sir ginnova here in tsikot for the stocks.
    Ahh gets sir! Thank you very much! mukang paguran pala yan

  7. Join Date
    Mar 2015
    Posts
    83
    #1997
    Quote Originally Posted by Dobermaxx99 View Post
    Ahh gets sir! Thank you very much! mukang paguran pala yan

    - - - - - - - - - - - - - - - - - - - - - -



    Ahh gets sir! Thank you very much! mukang paguran pala yan
    Hehe, mahirap maging OC ngayon tag-ulan sir. Pero bawi naman ang pagod kapag good results. Enjoy:D

  8. Join Date
    Jul 2007
    Posts
    1,245
    #1998
    I have opened bottles of paint protect , ksg, Blackfire, Wolfgang , reload, hydro2 etc. Sa mga malapit lang d2 sa akin. You can come to my place and try out them

  9. Join Date
    Jul 2015
    Posts
    347
    #1999
    Quote Originally Posted by Ginnova View Post
    I have opened bottles of paint protect , ksg, Blackfire, Wolfgang , reload, hydro2 etc. Sa mga malapit lang d2 sa akin. You can come to my place and try out them
    Yun o! Npkagandang offer nyan, try try na!

  10. Join Date
    Sep 2011
    Posts
    241
    #2000
    Quote Originally Posted by monty_GTV View Post
    anong particular brand ng QD yan si bb, ang ginagamit ko kasing QD now ay diluted ONR
    Nanosliq usually, minsan yung QD ng armor all and MAFRA but I like the Meguiars Final Inspection medyo mahal nga lng.

Tags for this Thread

Detailing Thread [For Newbies][continued 3]