Hello, ask ko lang if ok lang to para sa brandnew auto ko.
1st coat: Collinite 476
2nd coat: Mothers top coat
3rd coat: any spray wax
Thanks!!
Hello, ask ko lang if ok lang to para sa brandnew auto ko.
1st coat: Collinite 476
2nd coat: Mothers top coat
3rd coat: any spray wax
Thanks!!
Hindi po ako familiar kung quick detailer yung 2nd and 3rd, nakita ko lang kasi sa pinag carwashan ko yung ginamit nya..balak ko gayahin dahil natuwa ako sa result, ganda ng beading ng tubig nung umulan,
Bale 1st coat nya collinite 915, tapos ginamitan nya ng mothers top coat, tapos may spray wax sya na ginamit nanogloss ata or something ginamit nya..
Ano po advise nyo sa 2nd and third? Thanks!!
And question din pala, ok lang na na for example after a month lagyan ko ulit ng collinite without removing the existing wax? Or dapat before ko gamitan ng collinite 476 iremove ko muna yung existing wax? Thanks!!
^just to give you an idea bro, eto gamit ko ngayon
1. mothers step 1 (polish)
2. mothers step 2 (glaze)
3. collinite 845, nano gloss, TW ICE liquid, TW ICE spray, micromagic (shuffling depende sa mood)![]()
LSP ko yun #3 products mentioned.
every week or two ang lagay ko depende kung may beading pa after car wash. Bale bago ko dry yung car after car wash spray muna water to check kung ok pa beading, pag ok pa i give it another week. if it still beads after 2 weeks though, i still apply another layer of lsp depende kung ano mood. Pag wala sa mood (tinatamad) tw ice spray wax lang or tw ice liquid wax; pag medyo chill lang collinite 845; pero pag gusto ko talagang pag pawisan, micromagic para mahirap ibuff off hehehe