Custom Made Mesh Grille

**boybitz** · December 3rd, 2002 12:21 PM

BlackMagic,
Yung orig grill ko kasi may damage na, yung clips nya putol na, kaya pa ba yun?
Ano ba yung sa friend mo, gawa from scratch or yung orig grill lang ang inaayos nila?

**BlackMagic** · December 3rd, 2002 01:36 PM

orig grill

**hci02** · May 6th, 2004 02:01 AM

Up ko lang ito mga bro.

Sa mga nagpost dati, kumusta yung mga nabili niyo?

TY.

**zanch** · May 8th, 2004 08:27 AM

mga how much black magic? chicken wire gamit?

**slip-slick** · May 8th, 2004 10:50 PM

i used aluminum mesh used for screen doors. you can get this from any glass and aluminum shops. i spent less than P300 for doing the top and bottom grilles of my VTi, plus a whole lot of bandages..

here's a photo.. bare lang ung mesh, no paint (and very dirty sa picture na to). trial run ko pa lang yan e, just to see how it looks. it turned out ok, next time, try ko naman paint ung mesh.

**kuroy** · May 9th, 2004 11:54 PM

papaano mo na-mount? nag drill ka ba ng holes or something?

**odell** · May 10th, 2004 12:46 AM

alam ko same bracket used sa stock..

ganun kasi sakin dati sa itlog lancer ko...

**zippo** · May 10th, 2004 02:21 AM

dude try mo ren sa evangelista sa mga gumagawa ng bodykits. gumagawa sila ng mga grille. mura lng mga 800 maganda pa. pro kung marunong ka tumawad pwede pa bumaba price nyan. kalimutan ko yung name ng shop. basta yung harapan puro mga bumpers yung naka display..

**slip-slick** · May 11th, 2004 12:42 AM

ung sakin, for the lower grille, i drilled small holes sa bumper, 5mm bit yata ung gamit ko. then i used wire ties, ung plastic. pag naka install na, hindi naman kita.

for the upper grille naman, no need to drill holes. disasemble mo ung oem grille, tapos i-sandwich mo ung grilles between the pieces. swak na swak!!