New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 31
  1. Join Date
    Nov 2002
    Posts
    162
    #11
    BlackMagic,
    Yung orig grill ko kasi may damage na, yung clips nya putol na, kaya pa ba yun?
    Ano ba yung sa friend mo, gawa from scratch or yung orig grill lang ang inaayos nila?

  2. Join Date
    Oct 2002
    Posts
    1,084
    #12
    orig grill

  3. Join Date
    May 2004
    Posts
    13
    #13
    Up ko lang ito mga bro.

    Sa mga nagpost dati, kumusta yung mga nabili niyo?

    TY.

  4. Join Date
    Oct 2002
    Posts
    647
    #14
    mga how much black magic? chicken wire gamit?

  5. Join Date
    Jan 1970
    Posts
    396
    #15
    i used aluminum mesh used for screen doors. you can get this from any glass and aluminum shops. i spent less than P300 for doing the top and bottom grilles of my VTi, plus a whole lot of bandages..

    here's a photo.. bare lang ung mesh, no paint (and very dirty sa picture na to). trial run ko pa lang yan e, just to see how it looks. it turned out ok, next time, try ko naman paint ung mesh.

    Last edited by slip-slick; May 8th, 2004 at 11:31 PM.

  6. Join Date
    Nov 2002
    Posts
    748
    #16
    papaano mo na-mount? nag drill ka ba ng holes or something?

  7. Join Date
    Nov 2002
    Posts
    6,753
    #17
    alam ko same bracket used sa stock..

    ganun kasi sakin dati sa itlog lancer ko...

  8. Join Date
    May 2004
    Posts
    94
    #18
    dude try mo ren sa evangelista sa mga gumagawa ng bodykits. gumagawa sila ng mga grille. mura lng mga 800 maganda pa. pro kung marunong ka tumawad pwede pa bumaba price nyan. kalimutan ko yung name ng shop. basta yung harapan puro mga bumpers yung naka display..

  9. Join Date
    Jan 1970
    Posts
    396
    #19
    ung sakin, for the lower grille, i drilled small holes sa bumper, 5mm bit yata ung gamit ko. then i used wire ties, ung plastic. pag naka install na, hindi naman kita.

    for the upper grille naman, no need to drill holes. disasemble mo ung oem grille, tapos i-sandwich mo ung grilles between the pieces. swak na swak!!

  10. Join Date
    Oct 2002
    Posts
    15,528
    #20
    zippo, i would appreciate it if you can give me the name of the shop that you stated above....

    sawa na ko sa oem grilles ko eh. thanks.

Page 2 of 4 FirstFirst 1234 LastLast
Custom Made Mesh Grille