Results 31 to 34 of 34
-
March 11th, 2014 09:16 PM #31
Depende sa condition ng paint sir. Usually Clay, Compound and Polish and Wax/Seal by a competent detailer ang kailagan. Claying alone can't remove oxidation. Can you post pictures sir?
-
March 11th, 2014 09:20 PM #32
Sa Blade, True Value, Handyman, even Ace Hardware, meron yan Mother's Clay Bar kit. Shell out more than 1k, pero not more than 1.5k lang ang Mother's Clay Bar kit
-
March 11th, 2014 09:30 PM #33
fyi, claybar alone will not turn your car to a showroom shine. claying is just a part of paint preparation process to get rid of contaminants in the paint surface. even oxidation cannot be remove by just claying. paint correction or polishing using compounds is the only way to make the paint surface free from contaminants, oxidation, scratches and swirls that blocks the paint to shine. after the paint surface is properly prepped, a good quality sealant or wax is applied for added protection. the common practice goes like this, washing->claying->polishing->finishing->sealant or wax application...
-
July 8th, 2014 07:33 AM #34
That process took me four hours to complete this morning.
*TS - I store my uses clay bar in a zip lock bag, leave it in a cool dry place
Posted via Tsikot Mobile App
Puwede i try, 1. Palit air filter 2. Linis throttle body 3. Linis MAF sensor 4. Check spark...
high idle RPM at engine start