Tsikot.ph PHUV Prototype

[cuecraftsman]

after reading sir delfin's email invite... here i am, have read few post... galing talaga ng pinoy!

re:ME, got a ME friend that contarcted/restored my '55 benz back early 90's... may sariling bender sa bahay/welding xlt fabricator din nun panahon yun... kaso lang when pinatubo struck san fernando (oct 95)...wala gano customer, hence was force to work as a quality control engineer in 1 of the jap automobile plant in laguna.

chasi manufacturer: sa may valenzuela meron nag fabricate/ dun gawa yun mga XLT/elf/jeep chasi ng pampanga/bulacan... or SPCMMI sa san pablo lag/ sa mga jeepney chasi naman.
pwede din pa custom made ng chasi sa kanila...

may friend din po ako na may CNC laser cutter/ind'l machine press
to potable CNC mill/milling up to 6 axis (can engave/cut metals for emblems/decals) or
related task...can be usefull...

lawin motors po is temporarily closed due to financial problems...
dami po kalaban, subic/cebu imports, xlt fabs in pamp, multi cabs in cebu
korean vans, but its facility is intact... ( pwede po natin pagusapan)

wala lang po time magbasa pa...but i will, sino punta WTC bukas?

[cuecraftsman]

years ago sumali din ako sa UV on the spot designing contest sa PICC sponsored then by FMC... counterFX name ng entry ko... its similar to then
anfra transporter but with simplier body lines/curves... sa pampanga pa ako na-uwi then...hindi kuna alam kinahinatnan.

back then HOT sa market ang tamaraw from toyota... sana sinunod nila
trend...ng nagkaroon sana ng FMC-taxis... years later isuzu/mitsu introduce their own variants...

just a note to designers... make the head lamps/tail/signal/clearance lights simplier
square/rectangular even round para mas madali makahanap ng aftermarket
parts yun pobreng may ari...(concept ng owner/jeep) pag kase ala crv/altezza
hirap din pa custom-made fabricate ng ganun from plastic manufacturers kung konti lang...gawa pa sila mould/spl order???
mahirap humanap ng pyesa...pag ala "japon" ganun din... parang XLT ang dating??? sa grill nalang bumawi....dito ang distincion!

[OyiL]

fender flare style collection..need suggestions.

[ISPRIKITIK]

Magandang araw po! Im a new member of tsikot.com and found this thread which interest me. Otherwise, I will share and post my phUV concept here soonest.

Salamat Po!

[OyiL]

Magandang araw po! Im a new member of tsikot.com and found this thread which interest me. Otherwise, I will share and post my phUV concept here soonest.

Salamat Po!

welcome!
eagerly awaiting to see your concept sketches

[drey]

I have sketches. But I have to scan them. But I do have a lot of blueprints myself.

Im working on a van. Probably a LWB and a SWB version (SWB is for the 4WD version) I am also thinking of a very competitive angles.

[OyiL]

I have sketches. But I have to scan them. But I do have a lot of blueprints myself.

Im working on a van. Probably a LWB and a SWB version (SWB is for the 4WD version) I am also thinking of a very competitive angles.

the blueprints are very useful for measurement comparisons between what is out there and what we are designing para realistic talaga. does your blueprint have measurements? whats the resolution of those blueprints that you have? mas malaki, mas maganda para madaling sukatin.

[roman]

Hi guys...! Im also new to this thread and I am glad to see the enthuasiasm in you.. Just want to ask if anybody here resort to making scale model after finishing your designs? I think its a nice idea and cheaper too so that you can actually see how your drawings would look like in the final prototype... Because even the big manufacturers they still do clay modeling before deciding to roll out into final protoype.... Just asking.

[OyiL]

Hi guys...! Im also new to this thread and I am glad to see the enthuasiasm in you.. Just want to ask if anybody here resort to making scale model after finishing your designs? I think its a nice idea and cheaper too so that you can actually see how your drawings would look like in the final prototype... Because even the big manufacturers they still do clay modeling before deciding to roll out into final protoype.... Just asking.

we have thought about that. pero 3D model pa lang ang pwede sa ngayon. we will post it pag finalised na yung design

[dprox]

Hi guys...! Im also new to this thread and I am glad to see the enthuasiasm in you.. Just want to ask if anybody here resort to making scale model after finishing your designs? I think its a nice idea and cheaper too so that you can actually see how your drawings would look like in the final prototype... Because even the big manufacturers they still do clay modeling before deciding to roll out into final protoype.... Just asking.

Hi Roman.
Scale modeling is actually the next step to computer 3D modeling.
Small design group lang tayo dito, kaya can't afford full-size (FS) clay or wood models.
The scale model is the bridge between the drawings and the prototype.
So far, we are seriously thinking of building up to the ... < > ... stage.
Meantime, if you're really into this project, read the thread history, drop by often, and if you have other ideas, please don't hesitate to post them. BUT if you want some confidentiality, you can PM architect, OyiL, or myself.

dprox
www.disenyopilipino.ph

You might want to check out the slide show at http://www.disenyopilipino.ph/Chokar...brication.html

[ISPRIKITIK]

Magandang umaga po! I have difficulty uploading my file which shows my proposed PhUV design concept. Can anyone here help me to upload the file.

Salamat po!

[OyiL]

Magandang umaga po! I have difficulty uploading my file which shows my proposed PhUV design concept. Can anyone here help me to upload the file.

Salamat po!

i havent tried uploading files as attachments. what i do is: upload the file to a free file server for photos(photobucket is good - wala yata bandwidth limit). then copy the links of the images you want displayed in this forum. tapos paste the copied link location. should look like this:
"[img] link location ex. http://photobucket.......file.jpg[/img]"

[ISPRIKITIK]

Hi OYIL!

Magandang tahghali po! Can I send to you my file (i need ur email add) and kindly upload it in behalf of the members here. You can chat me at palo2k*yahoo.com im online now.

Salamat po!

[OyiL]

Hi OYIL!

Magandang tahghali po! Can I send to you my file (i need ur email add) and kindly upload it in behalf of the members here. You can chat me at palo2k*yahoo.com im online now.

Salamat po!

ok then pls send it to lotku_aga*hotmail.com

[ISPRIKITIK]

Kabayan Oyil,

Ive already send the jpg files to your hotmail account. Thank you for your prompt assistance.

[OyiL]

Kabayan Oyil,

Ive already send the jpg files to your hotmail account. Thank you for your prompt assistance.

FFP's design!!



keyox! pang mass-prod!

[ISPRIKITIK]

Many thanks to kabayan Oyil for assisting me to upload the jpg file for members viewing. On the other hand, the body design concept is masculine & ruggedness which suits its purpose. Hopefully we can work together to achieved the PhUV prototype.

Salamat po!

[OyiL]

Many thanks to kabayan Oyil for assisting me to upload the jpg file for members viewing. On the other hand, the body design concept is masculine & ruggedness which suits its purpose. Hopefully we can work together to achieved the PhUV prototype.

Salamat po!

*FFP
that is a good concept. But there is one thing I would like to remind you - this forum might be monitored by other interested parties - the big boys perhaps. There is a chance that your design might be copied and used by them. If you want, we can take it down

[roman]

Thanks dprox, I am dropping by this forum daily. I have also read the threads from the beginning... If I have some ideas and suggestions for sure I will post it. I dont know how to PM... excuse me... bago lang ako sa blogging.

Hi Roman.
Scale modeling is actually the next step to computer 3D modeling.
Small design group lang tayo dito, kaya can't afford full-size (FS) clay or wood models.
The scale model is the bridge between the drawings and the prototype.
So far, we are seriously thinking of building up to the ... < > ... stage.
Meantime, if you're really into this project, read the thread history, drop by often, and if you have other ideas, please don't hesitate to post them. BUT if you want some confidentiality, you can PM architect, OyiL, or myself.

dprox
www.disenyopilipino.ph

You might want to check out the slide show at http://www.disenyopilipino.ph/Chokar...brication.html

[ISPRIKITIK]

*FFP
that is a good concept. But there is one thing I would like to remind you - this forum might be monitored by other interested parties - the big boys perhaps. There is a chance that your design might be copied and used by them. If you want, we can take it down

Magandang umaga po kabayan Oyil!
I agree with you, the design concept is excusively for PhUV prototype, otherwise, highly appreciated if you can find a way to copyrights the designs. I have a lot of auto body design (ie. family car, pick-up truck, mini-buses and military utility truck). I also conceived a new modern design for jeepneys and tricycles which utilizes fiber glass materials. On the other hand, I wish to express my support to the development of the PhUV prototype.

Salamat po!