Auto Plastics & Alternative Materials

**architect** · June 25th, 2007 08:05 AM

*wildthing,

Will take you up on that.

Thanks so much!

**ghosthunter** · June 25th, 2007 09:16 AM

Originally Posted by wildthing

Oh BTW, the lecturer there is Mr. Nard Samonte - have made whole body Taxi from fiberglass and resin during the early 90's. He claims to have registered with LTO and is a licensed to do monoque chasis.

Pwede sigurong maki-"ride" sa kanya to have a legal chasis the PhUV, that could be registered sa LTO.

Is that Maynard Samonte?

**wildthing** · June 25th, 2007 01:42 PM

Maybe, he didn't gave his whole name - he is about 50-60yrs old

**donutb0y** · September 28th, 2007 02:56 AM

i'm about to make a ducktail spoiler for my car... since di uso dito ang ducktail spoiler sa civic... i will use liquid styrofoam then carve it then cover it with bondo after.. di pa kasi ako marunong mag mold ng carbon fiber e.. hehe

**wildthing** · September 28th, 2007 06:28 AM

^^It won't do you good...marupok yan sir.

Anu ba ang itsura ng DUCKTAIL SPOILER?

Tutal DIYer ka, why not do it properly, use plain fiberglass muna before jumping into carbon fiber.

Materials are readily available kung nasa Pinas or US ka.

where do you get liquid styrofoam?

**donutb0y** · September 28th, 2007 08:14 AM

hmm.. manipis lang na ducktail spoiler.. yung parang sa mga bmw's.. pwede rin fiberglass.. pero parang testing muna kasi gagawin ko e... pag gumana then gagawin ko sya as plug para gawin fiberglass na.. pero lang ako marunong mag cast ng isang buong hulmahan..

binili ko yung liquid styrofoams, resins and glass at tapplastics.com

**safeorigin** · September 28th, 2007 07:11 PM

try reinforcing your experiment with natural fibers(eg. bamboo). trust me, it works and it HURTS.

**wildthing** · September 28th, 2007 08:02 PM

donutboy,

wala bang local supplier (philippine base) yung liquid styro na yan?

**donutb0y** · September 28th, 2007 09:47 PM

try mo siguro sa mga hardware shops or auto body shops... baka meron sila dun.. or kung meron sa pinas na hobby shop, malamang meron sila dun..

**wildthing** · November 30th, 2007 05:48 AM

Originally Posted by architect

*wildthing,

Will take you up on that. Thanks so much!

architect,

Eto pa ang isang option for a more professionally built material - galing ito sa website nila - http://www.inca.com.ph/

INCA PLASTICS PHILIPPINES, INC. designs, manufactures and markets plastic products using the process of rotational molding. INCA only uses virgin Polyethylene resins that are US FDA approved, food grade, and compounded with UV stabilizers for maximum protection for outdoor use.

.....INCA has an engineering design team and operates a mold shop in the Philippines, fabricating molds and proprietary tools. This enables INCA to rapidly prototype custom designs and produce plastic products in just a few weeks setting it apart from other plastic processors.

.....Include INCA in the development of your product designs and watch your ideas shape into plastics. Contact us NOW!