Results 1 to 10 of 11
-
Tsikot Member
- Join Date
- May 2005
- Posts
- 4
January 17th, 2007 12:15 PM #1Please give me advise on what to do. I just found out may maliit na crack sa radiator top ng EK ko. Plastic material. Ano advise niyo gawin ko, bili bago na evercool or pa repair ko nalang sa Denso? San din maganda pagawa? QC Cubao area. Thanks!
-
January 17th, 2007 02:16 PM #2
Papalitan na yang plastic part na may crack, but not the whole radiator. Look for a shop that will not charge you much, but with quality on their works. For me, I always go to Denso in Makati for any radiator and AC problem. Inquire ka dito kung QC ka. CELTIC COOL AUTOMOTIVE.1328 E. Rodriguez Ave., (02)727-6133.
-
January 17th, 2007 04:32 PM #3
IMO bili ka na lang evercool. It's not that expensive tapos brand new pa.
-
January 17th, 2007 11:10 PM #4
Have the upper plastic tank replaced na lang. It will keep the value of your car and its original performance. Replacing it with brass tank or other replacement will bring down its value. Baka akalain pa ng future buyer nag-overheat makina mo. It wont cost you much and kung QC area nga, Celtic Cool is a good shop. Di ka lolokohin nyan.
-
February 8th, 2007 04:24 PM #5
-
-
Tsikot Member Rank 5
- Join Date
- Nov 2003
- Posts
- 3,849
-
March 16th, 2007 07:36 AM #8
May bagong radiator sealant ngayon...Gladiator ata pangalan...ok siguro kung di naman ganun kalaki yung butas. Saw one in Ace Hardware
-
July 26th, 2007 08:06 PM #9
San po yung celtic cool?
And also magkano naman pag bnew evercool for toyota exsior? tnx in advance
-
July 27th, 2007 10:06 AM #10
evercool na nga yan.
pag repair kasi, you will never know when it will get busted again. take note that inside the radiator, there is high air/water pressure because of heat.
sinabi moh! i hardly see my children now. when they were young, schedules were more predictable.
Traffic!