thanks sa mgaadvice... got a "bnew" daw blower all together..sa ibang shop. 2700, kasama kabit...
thanks sa mgaadvice... got a "bnew" daw blower all together..sa ibang shop. 2700, kasama kabit...
perhaps the motor bushings were already ground useless.
when run at low speed, the armature barely turned, and no air was pushed out.
when run at higher setting, the larger oomph caused the armature to turn faster, pushing more air, giving the semblance that it was functioning ok.
that being the case, motor replacement is the solution.
Last edited by dr. d; June 1st, 2016 at 09:19 PM.