Yung akin nag iiskip, ano maganda gawin?
Sa windshield ba yun squeak nya? O sa wiper linkage bushing? Kung sa windshield, linisin mo lang mabuti yun glass nang winshield, a dishwashing liquid soap will do, at syempre, rinse it. Kung sa wiper linkage bushing ang squeak, wd-40 lang, spray it on that bushing area, let it soak. Then try to test run your wipers. Observe if it will still squeak.
Sent from my UP+ using Tapatalk
Your wiper linkage bushing, where the wiper arm connected, might be in wear condition na, kumbaga, may alog galaw na yun spindle sa bushing, kaya nai-skid. Kung hindi man, at mali ako, maari kailangan lang ng lubrication. Kasi sa kadalasan pag-uulan at naa-agusan ng gabok tangay ng tubig ulan. Nai-i-stuck up yun dumi sa pivot bushing ng linkage. Kaya nahihirapan i-swing at nai-skip sa pag-sway ng wiper arm blades.
Sent from my UP+ using Tapatalk
update lang. i already used the waxco wiper wash in my reservoir but still nandun pa rin ang skipping/squeaking ng lower part ng driver's wiper (after ma-wash out ng rain ang wiper wash).
i have also tried the auto gard glass cleaner and same din, nawawala ang squeaking for a while pero bumabalik din. tried alcohol cleaning sa new wiper blades, and cleaning the windshield.
ano kaya ang pwede ko pang gawin? :| standard size naman ng wiper ang gamit ko.
Solved. Turns out my "new" wiper is too hard. Mahaba habang observation pero Hindi nagbebend ang blade kapga pababa ang hagod at dun sya nagssqueak. Ended up reviving the stock wiper and with thorough cleaning works like new ulit. Look ma, no squeaks. But until when, I don't know. Hehe. Next step, paano palambutin ang new wiper. Thanks
Hi,
The wiper of my crv gave in, went to Concorde and they said only the Elevo brand would fit the crv. In my rush forgot to ask them to install it, also found the CRV stock wiper blades easy to install/remove. Now can't install the Elevo blades as it is not as simple as the stock CRV blades. Anybody has experience with the Elevo brand wiper blades?
Thanks