How can I place a long sticker on a round surface accurately?

[Harangody]

I need to put a 2" x 12" sticker on the rear glass.

[niky]

Measure off the spot you're putting it on with tape first.

[ghosthunter]

I need to put a 2" x 12" sticker on the rear glass.

You could ask tint installers to help you. At least with their method, you can still adjust the sticker to properly center it.

[raycon_24]

spray shampoo with water

[jick.cejoco]

use a sacrificial material like plastic film and fold it in half-this way you get the center if that's where you need it placed. then mark with a white board marker to mark the center. install the film sticker one side at a time just like what you do with "band aid". roll the tape a little at a time pushing out bubbles. if the film is not elastic enough, use a hair blower to warm the material and shape it to the surface you want it installed while the backing of the sticker is still on.

[chua_riwap]

baka problema rin ni TS on how to stick the sticker w/out the "kulubot".
kasi, pabilog yung surface. ang sticker maganda lapat pag flat yung surface.

i don't know kung isa yan sa issues nya......

[ghosthunter]

baka problema rin ni TS on how to stick the sticker w/out the "kulubot".
kasi, pabilog yung surface. ang sticker maganda lapat pag flat yung surface.

i don't know kung isa yan sa issues nya......

That is why its probably best to ask the help of some tint installers.

[Joe Magarac]

Put a markings on where you will place the sticker, spray the surface with shampoo mix with water, place the sticker while surface is still wet so you can move the sticker evenly and in place with ease. Let it dry, then wipe with clean smooth cloth. That's all.....

[Harangody]

Put a markings on where you will place the sticker, spray the surface with shampoo mix with water, place the sticker while surface is still wet so you can move the sticker evenly and in place with ease. Let it dry, then wipe with clean smooth cloth. That's all.....

Thanks! This worked.

Thanks rin sa replies ng iba.

[yapoy86]

yan din naman gamit ng mga tint installers.... use shampoo mixed with water....