Solarguard USA guys maganda kahit heavy black siya maganda ang visibility.![]()
kapapakabit ko lang kanina.![]()
Solarguard USA guys maganda kahit heavy black siya maganda ang visibility.![]()
kapapakabit ko lang kanina.![]()
hi! meron po akong napagpaquote-an dito sa may amin sa cainta/antipolo area. solargard 2100 lang super black for my hilander... pero wala pang tint sa harap kasi hindi daw nila kayang gawin yung buo sa harapan eh. mura na po yun no? and i think its original kasi they have boxes of solargard rolls na nakita ko. and early 90's pa itong shop na to.
mura na po yan sir just make sure na original nga yan. sakin kasi solarguard din 4000 ang pakabit ko kasama na yung 1 piece sa windshield. heavy black yung windows yung windshield lang ang medium black.
eto po yung sakin
http://tsikot.yehey.com/forums/showp...&postcount=476
yes po basta pag nagpakabit i'll make sure na yung kukuhain nilang tint eh makikita kong talagang puputulin nila from the roll itself na may box na nakalagay na solargard hehehe. better safe than sorry i guess.
huper optik...not very dark (which is perfect for California laws), but reflective and has amazing heat reduction capabilities.
F.y.i.
The duration of tinting a car depends on:
1. Old tint - if the tint in your car has been over 3 years, turned purple, and poor quality, this will take time to remove as we try to save the defogger as much as possible. We do not suggest rushing this part of the procedure as it requires skill and effort to remove the adhesive and clean up the glass well. If your car comes with faded tint, there is a 50/50 % chance in saving the defogger which will be determined by our tinters upon diagnosing the tint. An average sedan takes 1.5 - 2 hours to tint. Does not include waiting time and is done on a first come, first serve basis. Due to the number of cars tinted daily in our tint room, we suggest to make an appointment to ensure less waiting or no waiting time at all.
Bubbles / Water marks / Splice Lines
2. If you pick Vkool, Solargard and 3M Crystalline tints, the curing period is 3-4 weeks due to the multi layered technology. Water bubbles will appear after installation which will evaporate under the sun, gradually. This is actually another way of determining if your tint is of high quality, as the film is thick and comes with high heat rejection.
3. On every tint application / transaction, customers are given a sheet with special instructions such as, don’t roll down the windows for 48 hours, don’t wipe etc. and also important information regarding water bubbles, hazy look and splice lines which will disappear in time. Not only do we render the instructions, our tinters and staff explain to the customer about these characteristics so to avoid the inconvenience of them coming back immediately when the curing period hasn’t passed its time.
4. All tints we sell come with warranties and are replaced if ever there is a defect or if marks appear after the curing period is over. We will not replace the tint for water marks before the drying period as it clearly states on the instructions that, it will disappear. Water marks ( which gives the hazy appearance ) normally appear on the front windshield when there are no cuts. Water bubbles on the corners are still able to be taken care of upto a month after the curing period. There is a big difference between water marks and bubbles which look similar.
5. If the water marks and bubbles still remain on the tint after the curing period, it is a s.o.p. for our store to replace the tint without any question.
good day mr LA cars... is there a way to know if a tint is original or not? how would you know if its original or not? 3M has its brand written all over it so its kinda easy. how about the other brands? take solargard for instance. thanks!
i just had mine installed... pero wala pang harapan. heavy black na solargard yung mga bintana. wala pang nakalagay sa windshield. i think medium black na din ipalagay ko. maliwanag nga ang solargard compared sa ibang brands na dark din and pag sa labas itim na itim talaga sya. pag heavy black din ilagay ko sa windshield suicide na no? hehehe.
eto po ang aking sasakyan with heavy black solarguard sa windows at medium black sa windshield (1 piece)![]()
nalilito ako if solar gard or 3M gagamitin ko?
question bawal ba ang naka heavy black sa lahat ng windows and windshield?
if mag pa heavy black ako sa harap at likod ng windshield may makita pa kaya ako pagka gabi? lalo na pag umuulan?
to LA Cars,
how much will it cost to have a mid 90s land cruiser tinted with 3m or solarguard tint, full front?
i am looking at the panther black type tints...
thanks.
Sad to say I'm not satisfied with the service of LA Car Accessories.I’ve returned my vehicle (brand new Mitsubishi Adventure) twice in there shop because of bubbles and minor scratches in their solar guard tints. In case you’re going to have your tint installed in their shop, my advice is to check the tint that they will install in your car because they claim that bubbles and “small” scratches in the tint is “normal” but in their ads in the newspapers they claim that its pollution and “bubble free”. By the way, the price of their tint is more expensive compared to other shops.
![]()
F.y.i.
The duration of tinting a car depends on:
1. Old tint - if the tint in your car has been over 3 years, turned purple, and poor quality, this will take time to remove as we try to save the defogger as much as possible. We do not suggest rushing this part of the procedure as it requires skill and effort to remove the adhesive and clean up the glass well. If your car comes with faded tint, there is a 50/50 % chance in saving the defogger which will be determined by our tinters upon diagnosing the tint. An average sedan takes 1.5 - 2 hours to tint. Does not include waiting time and is done on a first come, first serve basis. Due to the number of cars tinted daily in our tint room, we suggest to make an appointment to ensure less waiting or no waiting time at all.
Bubbles / Water marks / Splice Lines
2. If you pick Vkool, Solargard and 3M Crystalline tints, the curing period is 3-4 weeks due to the multi layered technology. Water bubbles will appear after installation which will evaporate under the sun, gradually. This is actually another way of determining if your tint is of high quality, as the film is thick and comes with high heat rejection.
3. On every tint application / transaction, customers are given a sheet with special instructions such as, don’t roll down the windows for 48 hours, don’t wipe etc. and also important information regarding water bubbles, hazy look and splice lines which will disappear in time. Not only do we render the instructions, our tinters and staff explain to the customer about these characteristics so to avoid the inconvenience of them coming back immediately when the curing period hasn’t passed its time.
4. All tints we sell come with warranties and are replaced if ever there is a defect or if marks appear after the curing period is over. We will not replace the tint for water marks before the drying period as it clearly states on the instructions that, it will disappear. Water marks ( which gives the hazy appearance ) normally appear on the front windshield when there are no cuts. Water bubbles on the corners are still able to be taken care of upto a month after the curing period. There is a big difference between water marks and bubbles which look similar.
5. If the water marks and bubbles still remain on the tint after the curing period, it is a s.o.p. for our store to replace the tint without any question.
Also, regarding pricing, Solargard does cost more than other brands hence we offer different choices to the customer to decide. There are only few Solargard dealers in Philippines, other stores will state that they have Solargard, but when asked for a signage, brochure, etc, they show Sungard and make it look like its the same company when its clearly not.
Sungard is way cheaper than Solargard, which costs a little more than 3M. Solargard also does take longer to dry due to the thickness of the film as compared to other brands.
Hi guys, I have a question: is there a sure-fire way to ensure that the rear window defogger won't be damaged whenever the tint is removed?
Years ago, I had the tint on my previous car changed and at that time, I didn't even think about the possibility of the defogger getting damaged. After the tint was changed (I got Solargard from a shop in Cubao), I went home happy since it looked really nice. But as the days passed, I discovered that a majority of the heating elements of my defogger no longer worked. I concluded that it was probably damaged when my old tint was removed/scraped off.![]()