Rubbing compound for Windshield?

[suv]

Mga sir magpapakabit ako ng tint kaso sabi nung installer eh tatangalin muna yung mga watermarks. acid rain and yung mga alikabok sa windshield. pati yung loob ng car lilinisin yung windshield.

advisable ba yung rubbing compound na light grade?

[washburn]

works for me, sa pagtangal ng light-moderate scratch pero hindi ko pa na try sa mga hard water stains
para sure glass detail ka nalang, sayang naman baka numipis ang windshield mo

[russpogi]

Check the threads below:

http://tsikot.yehey.com/forums/showthread.php?t=37286
http://tsikot.yehey.com/forums/showthread.php?t=3275
http://tsikot.yehey.com/forums/showthread.php?t=32540


Hope these help!

[Eismann]

It works well but takes so much time and effort to finish just the windshield. If you are trying to tone your arm and shoulder muscles, you can DIY and hit 2 birds with one stone.

[wakin]

nag pa windshield glass detailing ako sa big berts and they used rm rubbing compound.

[Galactus]

Pwedeng pwede. Ako, DIY lang, but allot at least 1.5 hours for just the front windshield. sakit pa ng braso at balikat ko after.

[BoEinG_747]

ng kalakasan ng bagyo dami sideline ng mga banaue roaming boys ..

ang dami nag scrub sa kanila ng windshield using rubbing compound

iyon daw ang the best time para nakatipid sila sa tubig kasi sinasabayan ang buhos ng ulan

[BoEinG_747]

600 Php nga pala rate nila ,para sa Vanette ng pinsan ko lahat ng glass doon
(pati ata side mirror)

[suv]

Check the threads below:

http://tsikot.yehey.com/forums/showthread.php?t=37286
http://tsikot.yehey.com/forums/showthread.php?t=3275
http://tsikot.yehey.com/forums/showthread.php?t=32540


Hope these help!

thanks for the reply.Sir yung nabibili sa ace hardware eh rubbing compound base or hindi? how about yung strip it? Sa nabasa ko sa link parang mas ok ang hindi rubbing compund.

[alwayz_yummy]

ako--i do this in all of my lite's window including the skylite! pero sa labas lang..not sa loob...

i use yung rubbing compound sa hardware namin, nilalagyan ko lang ng tubig par di masyadong solid at madaling i-pahid-->matagal lang talaga i-remove ang rubbing compund kung wala kang buffing machine..--a good arms and shoulder tonning: wax on, wax off