Question on Tint

**OTEP** · July 28th, 2003 12:43 AM

The problem with the US Gila is quality. Ito yung nagiging talong after a while so talo ka sa investment in the long run. Tapos double layer pa ginawa nila. Mas prone to scratches ang bubbles yun.

3M Super Black walang problema sa visibility. Sana nga yun na lang tint ko imbis na Solar Gard.

Go with 3M if you wan't privacy without losing much visibility.

**ssaloon** · July 28th, 2003 09:14 AM

PK::: i'm not sure kung kaya nila... basta from marcos highway sa lane na papuntang antipolo, kanan ka sa 7-11, amang rodriguez na yun (same street as mickey's autosound). dere-deretso ka lang, makikita mo sya sa left side ng road just after chowking (which is located on the right side).

HTH

**bacon** · July 28th, 2003 11:21 AM

ssaloon,
Thanks for the info, 'pre. I'm familiar with that shop since that's where I had my 'Reeds installed. I'm looking for other shops na meron ding Mirareed so I can compare prices and hopefully, highly recommended ng ibang members ng tsikot. The installation was ok, but nothing really great. Merong mga small bubbles na 'di nawala kahit naibalik ko na sa kanila. The tint is great, though. I felt it was just the installer's fault.

pajerokid,

Yep, they were able to install one piece Mirareed light smoke on my 2nd gen CRV. Yung 'Reed's mo, san mo napa-install?

**OTEP** · July 28th, 2003 11:49 AM

Mahirap lagyan ng 1-pc ang tonka Pajero. Problems with the local supplier daw. Imperfect ang salamin pagdating sa gitna. Sa Montero namin madali lang nalagyan, eh. Pati yung mga blister fenders madali na din daw lagyan.

Yung sakin tatlong beses inulit, eh. Ang daming naitapon na tint film bago nakuha. Sa Winterpine ko na pinagawa para sureball. Sa Jaffas at AEG sablay, eh.

**pajerokid** · July 28th, 2003 11:55 AM

I guess i'll just stick with my 2 piece front tint. I was just getting a bit picky, i guess.

bacon:: had mine installed at copperblue in p'que. near bf homes.

ssaloon:: hmmm. medyo trapik ata. anyway, pagtyatyagaan ko na lang 2pc tint ko hehe :D

**jayeina** · July 29th, 2003 10:24 AM

Originally posted by OTEP
The problem with the US Gila is quality. Ito yung nagiging talong after a while so talo ka sa investment in the long run. Tapos double layer pa ginawa nila. Mas prone to scratches ang bubbles yun.

3M Super Black walang problema sa visibility. Sana nga yun na lang tint ko imbis na Solar Gard.

Go with 3M if you wan't privacy without losing much visibility.

Tnx again OTEP, sabagay mura lang naman ang quote sa kin for 3M Super Black, ayusin ko muna yung suspension ko & patagalin ko muna ng konti itong tint ko (newly installed lang kasi e) then upgrade ako to 3M Super black. last question pre, ano ba magandang ilagay sa windhield na hindi ka kita sa loob? Super Black, Black or yung mga magic tints (what shade)? Tnx again!

**ssaloon** · July 29th, 2003 11:02 AM

3M magic dark ok sa windshield

pero gamit ko 3M dark (2nd darkest shade)

**kimpOy** · July 29th, 2003 01:14 PM

ako din MAGIC DARK or MAGIG BLACK
sa boung kotse

**OTEP** · July 29th, 2003 07:26 PM

Super Black ng 3M gamit dun sa windshield ng SiR na drive ko minsan. Kahit gabi, no problems with me. Pero sa Pajero, Magic neutral lang daw pwede kasi medyo makapal ang sheet ng Super Black. Hindi nila kaya 1-piece sa (slightly defective) windshield ko.

**pajerokid** · July 30th, 2003 01:48 AM

On the windshield 'defect'. I remember inasar ko pa yung installer nung reeds ko hehehe! He insisted na iba raw ang wshield ng blister kesa sa atin! Sabi ko pareho lang, kasi hindi niya ma-1pc yung harap ko. Guess he was right.... hehehe.