pano magtanggal ng conduction sticker without scratching the glass

[lnce420]

im not sure kung dito ko dapat ipost to.. anyway tinry ko gumamit ng paleta (yung ginagamit sa pag masilya) pero mejo nagagasgas yung salamin so tinigil ko.. me masusuggest ba kayo na tamang paggawa nito? TIA

[zidane21]

a simple cutter lang po sir pwede na. ganun lang po ginamit ko pang tanggal ng conduction sticker, di naman po gagasgas yun sa windshield basta "patagilid" lang po ang stroke ng cutter.

[rockstaremya]

try using a blade or a cutter. ingat lang baka masugatan ka. i've tried it na eh mas madali siya compared sa kamay or sa iba pang methods. cutter: just parang i pahiga mo siya then gently peel the sticker then kapag may lumabas na part ng sticker hatakin mo na lang with your hands. hope this helps.

[lnce420]

salamat.. try ko cutter bukas hehe mejo madilim na e baka masugat ako..

salamat ulit

[Memphis Raines]

salamat.. try ko cutter bukas hehe mejo madilim na e baka masugat ako..

..also don't forget to wear safety goggles (if you have or borrow one) yung clear or maybe a simple pair of shades. This way you have a some protection just in case the blade snaps and might chip off some debris into your eyes.

It can happen so better safe than sorry.

[raikkah]

Try mo hot water,,, then saka mo tuklapin

[arao]

hot water o kaya acetone.. bawat tuklap mo ng sticker pahidan mo ng acetone tapos tuklap ulit..

[recklus]

cutter lang yan, yung malaki ah para madali talaga tanggalin, remove the blade from the casing syempre o pwede din kasi mabili yung cutter blade replacement sa mga hardware for 10php. i used pliers to hold the blade para may pwersa ako since madikit talaga yung conduction sticker

[HIFI]

With all due respect sa mga nag recommend ng cutter....using a cutter is the riskiest way to do it.

Hot water on a towel. Tapal mo for awhile. You may even pour some on the sticker. Then peel with your fingers.