Huper Optik Tint

[NdoymaN]

Sir NdoymaN, i would like to ask if your installers perform double tinting? i am not sure of the right term but what i am planning is to put another film say the Huper Optic Ceramic 60 or 70 series on top my current windshield tint.

I am not really satisfied with the present tint, ang lawak kasi ng glass sa harap kaya ramdam ko pa rin yong init. My reason not to remove the old one.., laki ang na damage ko nito!!
Well, this is the 4th tint installed, mula from casa's free 3M (total crap ) to Solargard titanium 16, then to GSG 10(sobrang dilim sa gabi ) then to the current one. And the consequences of removing them resulted to noticeable hair line scratches mismo sa glass... Sides, quarter panels and rear has no problem, using Solargard GSG10.

My ride is a Jazz'10, presently using Solargard LX40 on my windshield. Looking forward to hear from you. Thanks.

I would suggest that you just choose from the available shades of Huper Optik. Meron din naman po syang darker shades kase kung papatungan naten, it will defeat the purpose of Huper Optik. Imagine, metalized film papatungan mo ng Nano Ceramic film. Di mo maieenjoy yung benefits nya sir.

Don't worry Sir sa pag alis ng existing tint.. Dumaan napo sa mga trainings mga tinters naten at takot narin maka sira mga toh.. I assure you na magiging maingat mga tinters namen. Di sila kagaya ng ordinaryong tinters.. Me mga sablay din sila pero monitored yun at nabibigyan ng corrective actions sa bawat mali kaya ingat na ingat sila.

[NdoymaN]

Nagpakabit ako ng Huper Optik last Monday sa Ford Libis. Ceramic 20 all around except windshield. Heat rejection is very good although bitin kasi wala pa tint yung windshield kasi wala C30 na available. Pero ramdam mo talaga yung difference in heat na nanggagaling sa windshield at sa sides na tinted.

There is one thing lang na nabobother talaga ko, specifically dun sa rear glass. Meron mga white areas na nakikita on certain angle mo siya titignan, mas obvious siya pag may direct light na tumatama. I found out na yun pala yung mga areas na ginamitan ng heat gun. Sa ibang forum "ghosting" yung tawag nila.

Eto sample itsura niya pag sa araw, direct sunlight.
http://i1241.photobucket.com/albums/...05/HO/ho_1.jpg

Yung mga bilog, yun yung bubbles na aabutin daw ng 1 month bago mawala. May mga certain angles lang na kita siya.
Minsan yung taas lang, minsan yung baba, or left/right lang. Depende sa tama ng ilaw at kung san mo siya titignan.

Eto naman itsura niya pag gabi tapos natamaan ng ilaw
http://i1241.photobucket.com/albums/...05/HO/ho_2.jpg

Bottom part
http://i1241.photobucket.com/albums/...05/HO/ho_5.jpg

Bottom left
http://i1241.photobucket.com/albums/...05/HO/ho_4.jpg

Bottom right
http://i1241.photobucket.com/albums/...05/HO/ho_3.jpg



Sir Ndoyman,

Although na-raise ko nanaman ito kay Sir Leo(sabi niya let it cure muna for at least a month), baka pwede pa-assess na din nung concern ko. Hindi ko kasi mapakita sa kanya yung pics. Baka po kasi nasobrahan ng gamit ng heat gun nung sa akin? Para mapapalitan ko na siya agad habang hindi pa fully cured, baka kasi ma damage na yung defogger kung after a month pa papalitan. Or kung normal lang talaga yun at mawawala din totally after 1 month? Para na din ma-inform yung mga future huper optik owners para hindi sila magulat.

Concern ko rin kasi yung sa windshield kasi if I'm not mistaken kailangan din siya gamitan ng heat gun since hindi din flat yung glass. Baka maging ganun din itsura(on certain angles) ng windshield pag nagpakabit na ako ng C30.

Sir, pinrint ko yung pictures na pinost mo at binigay ko sa Unit Head namen.. Sinabi ko narin kay Sir Leo yung concern mo.

Let it dry muna sir for 2 - 3 weeks at pag di nawala, sabihin mo kaagad saken or kay Sir Leo at ako mismo mag rerecommend na palitan yan. Kung workmanship issue Sir, wala tayong usapan, palitan kaagad.

I will support your concerns dito sa office. Though hindi na ako humahawak ng Huper Optik, I can still help you hindi dahil lang na ka TSIKOT ko po kayo kundi client namen po kayo and we represent our company. Customer Satisfaction is our main goal kaya rest assured, NdoymaN will always be online and help you with your concerns.

[NdoymaN]

Nagpakabit ako kahapon ng c70 (lightest) sa windshield ng dmax ko ... Even though pin aka clear siya sobra Ganda heat rejection Nya. As in as claimed na 91% heat rejection as in wow!. Compared to other local tints, mas makapal ANG structure ng tint kaya mas matagal I install at I heat gun. kelangan talaga magaan ANG kamay
ng master tinter ..
Yup Lang talagang clear na clear parang walan naka install na tint , me blueish shade Lang. ANG sarap sa night driving clear n clear at sa noontime, the tint speaks for itself . 100% recommended

Thank you po sa good comment.

Sir yung sticker na pinangako ni Sir Leo sayo, pag me time ka paki claim nalang kay Ms. Maricar.

[Starex_Gold]

Guys meron na dito naka-try Huper Optik Klassisch or Klassisch Black series?

Thanks

[NdoymaN]

Guys meron na dito naka-try Huper Optik Klassisch or Klassisch Black series?

Thanks

FYI, yung Huper Optik na Klassisch Series parang 3M din.. Mostly sa mga Casa po namen, hindi na kame nag iissue ng 3M. Klassisch Black na.

[Starex_Gold]

FYI, yung Huper Optik na Klassisch Series parang 3M din.. Mostly sa mga Casa po namen, hindi na kame nag iissue ng 3M. Klassisch Black na.

Yup I'm aware na parang 3M lang din yung Klassisch series, pero somehow it's better than 3M diba sir?

Kasi nadala na ako mag-install ng mahal na tint sa kotse ko, yung isa flooded so pina-total loss ko sa insurance. Yung isa naman binenta agad. Medyo sayang kasi.. Hehe

Kasi sa totoo lang sir, yung 3M BC35 na naka-install sa Sportage ko, bullsh!t. Parang walang tint na naka-lagay.

[NdoymaN]

Yup I'm aware na parang 3M lang din yung Klassisch series, pero somehow it's better than 3M diba sir?

Kasi nadala na ako mag-install ng mahal na tint sa kotse ko, yung isa flooded so pina-total loss ko sa insurance. Yung isa naman binenta agad. Medyo sayang kasi.. Hehe

Kasi sa totoo lang sir, yung 3M BC35 na naka-install sa Sportage ko, bullsh!t. Parang walang tint na naka-lagay.

Yes Sir. Better than 3M and with 1 year warranty.

[bram]

Sir, pinrint ko yung pictures na pinost mo at binigay ko sa Unit Head namen.. Sinabi ko narin kay Sir Leo yung concern mo.

Let it dry muna sir for 2 - 3 weeks at pag di nawala, sabihin mo kaagad saken or kay Sir Leo at ako mismo mag rerecommend na palitan yan. Kung workmanship issue Sir, wala tayong usapan, palitan kaagad.

I will support your concerns dito sa office. Though hindi na ako humahawak ng Huper Optik, I can still help you hindi dahil lang na ka TSIKOT ko po kayo kundi client namen po kayo and we represent our company. Customer Satisfaction is our main goal kaya rest assured, NdoymaN will always be online and help you with your concerns.

Salamat sir NdoymaN sa assurance. First time ko lang kasi maka encounter ng ganun sa tint kaya nireport ko agad sa inyo. I will just follow your advise, wait nalang muna ako maka 1 month then update ko kayo

[albert_b]

Hi sir NdoymaN,
Paano ho ba processo for this. Punta ba muna sa Ford Libis or Fort tapos first come first served or by appointment.

Hingi na din ako ng estimate for a 2007 Kia Sportage
C30 sa windshield then C05 for the rest of the windows sir.

[NdoymaN]

Salamat sir NdoymaN sa assurance. First time ko lang kasi maka encounter ng ganun sa tint kaya nireport ko agad sa inyo. I will just follow your advise, wait nalang muna ako maka 1 month then update ko kayo

No problem Sir. Kung di ka satisfied after 1 month, palitan naten yan sir. Gusto namen yung natutuwa yung clients namen hindi yung namumublema sa ginastos nila. Dito lang kame sir. Alam mo naman number ni Leo. Update ko rin sya.

[NdoymaN]

Hi sir NdoymaN,
Paano ho ba processo for this. Punta ba muna sa Ford Libis or Fort tapos first come first served or by appointment.

Hingi na din ako ng estimate for a 2007 Kia Sportage
C30 sa windshield then C05 for the rest of the windows sir.

Inform nyo lang po kame at isschedule po namen kayo. Tapos kung san pinaka malapit na dealer namen, dun tayo meet ng mga tinters namen. pansin ko tiga Bulacan ka din? meron din kameng dealerships sa Carworld Marilao, Carworld Malolos, KIA Baliuag at Hyundai Baliuag. Kung san pinaka malapit sayo dun sa Bulacan pwedi rin tayo dun. Kung comfortable ka sa Ford Libis, ok din po samen. Basta kung san po ok sa inyo yun po masusunod.

22,000PhP po tayo sa full installation. Me discount pa yan basta sure na tayo sa installation.

Let me know kung kelan Sir.

[laserbim]

I'm gonna have my Innova windshield fitted with Huper Optik tomorrow at Ford Libis through NdoymaN. I'm getting either a Ceramic 15 or 20. I'll decide once I see the samples. Will keep you posted on the outcome.

[NdoymaN]

I'm gonna have my Innova windshield fitted with Huper Optik tomorrow at Ford Libis through NdoymaN. I'm getting either a Ceramic 15 or 20. I'll decide once I see the samples. Will keep you posted on the outcome.

Sir pa adjust kahit mga 1:30PM daw sa Ford Libis. Ok lang?

[laserbim]

Sir pa adjust kahit mga 1:30PM daw sa Ford Libis. Ok lang?

Oks lang. Thanks.

[crazy_boy]

ndoyman, yung mga tinters niyo, are they using metal or rubber tools? i had a bad experience with tinter using metal tools. puro gasgas salamin ko.

thanks~!

[ronw123w124]

ndoyman, yung mga tinters niyo, are they using metal or rubber tools? i had a bad experience with tinter using metal tools. puro gasgas salamin ko.

thanks~!

Nung nagpakabit ako last Saturday, wala akong maalala na metal na ginamit panghagod, plastic lang yung nakita ko.

[NdoymaN]

Nung nagpakabit ako last Saturday, wala akong maalala na metal na ginamit panghagod, plastic lang yung nakita ko.

Thanks Sir Ronw123w124. Yes po you are correct.

*crazy_boy

Bawal po metal tools samen.. Rubber squeegee po gamit namen. Di rin kame gumagamit ng needle para butasan mga bubbles. pinapatuyo talaga namen yung film hindi namen dinadaya..

[NdoymaN]

Oks lang. Thanks.

Thank you po Sir Laser.

[laserbim]

I'm gonna have my Innova windshield fitted with Huper Optik tomorrow at Ford Libis through NdoymaN. I'm getting either a Ceramic 15 or 20. I'll decide once I see the samples. Will keep you posted on the outcome.

Peeps, my Innova windshield is finally fitted with Huper Optik and I must say that I like it. I'll let you know about my experience probably ater 1 week of using the car.

But just to share...I chose from the swatches and found Ceramic 15 to be best for me. It has a very high TSER of 73% and the blackness goes well with my 3M ST FX05 tint on the sides. It is aslo dark enough that only the silhouette of the person in the car would be seen and bright enough for me to see at night. I'm quite satisified so far. But I have yet to see how it performs under the scorching heat of summer in the next couple of days. Will keep you posted.

As far as installation is concerned, I had it done in Ford Libis. I went to the accessories department and spoke to Aaron, who was not aware about my appointment, but he immediately went to another guy named Mike who happened to be the one sent by Leo/NdoyMan to do my tint. Mike was easy to talk to so the transaction was smooth. My car was driven inside the showroom and the installation was done inside. So it was good because the place is airconditioned and thus a good environment for installing tints. I went back after 1.5 hours when the whole thing was done. There are some small bubbles scattered around the tint but I believe this will go away after 2 to 4 weeks. I was told that my warranty paper will be given to me some time next week.

The best thing about my transaction is that Ndoyman gave a discount. So thanks NdoymaN! One satisfied Huper Optik client here!

P.S. NdoymaN: Pls text me or PM me once my warranty paper is ready and when/where I can claim it. Thanks.

[marui_man]

Sir, PM sent.