Quote Originally Posted by zmokez008 View Post
tried there product a year ago..went to pampangga to avail there service kasi sabi nanduon mga master tint..after a day may malaking bubbles sa windshield and passenger side then may dumi sa loob ng tint sa likod and sunroof..requested na ipaulit sa ford libis na lang because malayo kung ibabalik ko pa sa mga master tinter kuno..after ipaulit windshield both side may bubbles again then passenger side mali ang cut sa ilalim hindi nacocover ng tint..balik ulit ako so 3rd time na..hineat windshield sabi mawawala daw..after a 2 days bumalik ulit yun bubbles sa windshield..binalik ko ulit 4th time hineat nanaman tapos after a day bumalik nanaman..pang 5th time bumalik ako sabi ko pakipalitan na kasi pabalik balik na ako e..sabi nung taga ford libis iheheat pa din daw kesyo makukuha daw yun..halfway pauwi umangat nanaman siya..nakakapagod pabalik balik sa inyo..taga tondo pa ako and may work so hindi biro pag dinayo ko kayo..was hoping na maganda service ninyo sa laki ng sinisingil ninyo tapos sasabihin niyo 5 years warranty di nio nga mapalitan yun tint sa windshield..very very disappointed customer here.
Last time nagpa-install ako ng Huper Optik (C30), ang daming bubbles talaga - as in hundreds of tiny dots and some larger ones. I intended to have it redone but was too busy. Then I noticed the number of bubbles decreasing every day until after about 2 and half weeks later, all the bubbles were gone and what I've got was a flawless tint.

The only problem I had with Huper Optik was ghosting (in another car). This is caused by applying too much heat especially on curved surfaces. The HO films are thicker than most kaya they have to use a heat gun. Too much heat and you get these ugly looking cloudy smudges on your tint which become apparent at night when viewed from certain angles.