Tsikot Bit char-g team!!!!!!!

**fierari** · January 15th, 2003 11:49 AM

teka pano ba talaga i lowered? yung body lang ba? o yung chasis?

**sup** · January 15th, 2003 11:56 AM

for the front, yung body. for the rear, yung chasis and body na ata.. will find the link then post ko maya.. :D

**sup** · January 15th, 2003 12:02 PM

i found the link but this is the extreme lowered bitcharg! syet.. sana ganito auto ko..
http://groups.msn.com/TheAdmiralsLair/bitcharggallery.msnw?Page=23
the milder (lowered) ones will be posted later.. trabaho muna ako.. hehe! :D

**sup** · January 15th, 2003 12:04 PM

i was wrong nga pala.. to lower the front, you need to put tabs too.. so both front and rear of the chasis will have tabs.. my mistake.. :D

**fierari** · January 15th, 2003 12:08 PM

may nakita ba kayong body na ganito?

**sup** · January 15th, 2003 01:02 PM

hindi siya bit charg tsong.. ibang brand siya na hindi ata binebenta dito sa atin (as far as i know..) the brand of this mini rc is shen qi wei.. it costs $15 to order the car online, $6 for the body only (not yet nclusive of postage and handling).. i think zipzaps has these too.. sayang nga at wala nito sa atin..

**sup** · January 15th, 2003 01:18 PM

Originally Posted by pajerokid

Ahehehe!!!! jay crew just look at the rc thread for the full story :D Eto summary, i got it from mbt second hand :D

bit char-g boys::: gaanong katulin to mga pre?

di namin masabi kung gano katulin mga toyz namin pajerokid.. but there are different motors with different rpm ratings.. the 1.0 motor is at 10,000rpm ; the 2.2 motor is at 22,000rpm ; fastest for the bitcharg is 2.6 at 26,000 rpm.. fastest as of now is the 3.8 at 38,000 rpm but this is for the bitracer.. it is not recomended to bitcharg peeps to use the bitracer engines due to it may cause stuttering (i dont know in what aspect though).. i just read this at one forum.. :D

**johnadoo** · January 15th, 2003 01:47 PM

Dudes, i have the Lucifer Rotor 3.0 all i can say is POTANG TULIN! pero ang drawbacks nito is i cant use it at the tracks...its too damn fast i end up crashing or making donuts. and the battery life is shorter. So far i have 1.0, 2.2, 3.0 rotors and to me the best rotor is the 1.0 for the tracks kasi madaling i-maneuver....swabe. yung 2.2 is still a bit wild...kailangan si takumi ka para ma-control....yung 1.0 & 12:1 combination is quite good.

**sup** · January 15th, 2003 02:15 PM

haha! kelangan pala mala takumi kami for the 2.2! magdedeliver muna ako tofu sa mt. akina for 5 years guys.. hehe! :lol:

johnadoo, astig yung pics mo.. putsa! cinareer mo na bitcharg! saya! gusto ko rin i-career kaso hirap talaga sa parts. gusto ko rin ng 1.0 para naman magumpisa muna ako sa mahina at manageable.. hirap nga i-maneuver 2.2 sa simpleng figure 8. kelangan medyo naubos na ng konti ang charge mo sa batt..

mabuhay ang tsikot bitcharg team! hehe! :D

**johnadoo** · January 15th, 2003 02:26 PM

.. putsa! cinareer mo na bitcharg!

hehehe....if you only knew....im now at the threshold of making my first track....i just bought the base board for the track...hehehe.....susubukan ko gayahin yung carmona....sans the inclines and declines....baka flat track na muna...hehehe pero kung mahirap, baka simple muna....:lol: next week im planning to get the booster....damn...bwisit talaga TOMY...nauubos pera ko. hehehe

**fierari** · January 15th, 2003 02:28 PM

hirap pala lowered pano ba cut yung body?

**fierari** · January 15th, 2003 02:32 PM

langya john tindi mo dalhin mo sa friday yan pre. lucifer motor pala ah magkano kuha mo?

hanggang dash board na lang ata race trak ko eh hahhahah :mrgreen:

**johnadoo** · January 15th, 2003 02:51 PM

Dude, bili ka ng x-acto blade or yung hobby drill. hinahanap ko rin nga yang drill eh...kasi kakatakot yung blade...hhehehe

bili ko sa Lucifer is 350, kaso last stock eh. pero baka next week meron ulit.:lol:

ndi ko madadala yung track noh, sobrang laki. at hindi pa nauumpisahan...materyales palang.:lol:

**sup** · January 15th, 2003 02:55 PM

tindi mo john! idol! if i only had the time.. saan kayo bumibili ng parts? meron ako excato blade kaso di pa ako nagkakaroon ng lakas ng loob mag-alter ng body.. baka bumili ako maya sa toytown glorieta ng body.. sana meron sila maganda.. gusto ko sana rx7 or kung meron sila trueno (gawin kong levin para may kalaban si takumi!!) :D

**pajerokid** · January 15th, 2003 03:31 PM

sup:: ang lufet pala ng mga bit char-g!!!! :mrgreen:

**sup** · January 15th, 2003 03:33 PM

malupit nga na in a smaller scale than you RCs. hehe! baka maya dalin ni johnadoo yung track niya sa fort.. RC eb na yan!! hehe! :D

**johnadoo** · January 15th, 2003 04:18 PM

hehehe...balitaan ko kayo pag tapus na yung track. pero dont expect too much, this is my first try at track making:lol: Ako rin takot akong gumamit ng blade kasi bka mabali yung body eh, maganda talaga kung drill. Yung mga parts may kakilala akong bumibili sa HK. Tell me what you want tingnan ko kung makakakuha siya.:lol:

**fierari** · January 15th, 2003 04:19 PM

ayos kaya lang one at a time lang tayo ha?

pare pareho tayong 27mhz eh hahahhahahhhahah

**Stuckinstock** · January 15th, 2003 04:46 PM

guys, try niyo yung toy store sa rockwell, sa may dulo ng 3rd level ata.. meron sila dun. P1.2K

meron din nun IntialD edition (AE86 + yellow FD body)

meron din Subaru at skyline bodies.

HTH.

**fierari** · January 15th, 2003 05:36 PM

Stuckinstock,

mahina yung project d set eh 1.1 lang saka alang kasamang mods. yung ae86 special edition na 1.6k lasama pang mods kumpleto 2.2 engine. bili ka na rin!!!!!!!!

The Largest Car Forum in the Philippines

Tsikot Bit char-g team!!!!!!!

Thread Tools

Search Thread

Display

Hybrid View