Results 1 to 10 of 18
-
Verified Tsikot Member
- Join Date
- Feb 2019
- Posts
- 8
May 14th, 2019 01:44 PM #1Good day mga Sir. papatulong sana ako sa problem ko. I have a starex 99 matic. regarding po ito sa brake. kung mga b'brake ako. kumagakagat nmn at first. then next brake ko. tumitigas na ung brake pedal niya at mahirap na i'brake tsaka umiilaw ung brake warning lights. at kong hahayaan ko muna mga ilang minutes. nag o'ok nmn po siya. pero everytime magbrake ako. nag'o-occur po ulit ung problema niya hard pedal braking. anu po kaya probs nun?.
salamat po. sana my mka tulong sakin.
-
May 14th, 2019 02:17 PM #2
-
Verified Tsikot Member
- Join Date
- Feb 2019
- Posts
- 8
May 14th, 2019 02:24 PM #3
-
May 14th, 2019 02:33 PM #4
The problem is around the brake booster.
Check for vacuum leaks.
Whenever there's not enough vacuum in the brake booster, the brake pedal gets harder and the brake warning lamp lights up.
Last edited by oj88; May 14th, 2019 at 02:38 PM.
-
May 14th, 2019 02:34 PM #5
-
Verified Tsikot Member
- Join Date
- Feb 2019
- Posts
- 8
May 14th, 2019 03:11 PM #6bihira ko lng po binubuksan ung reservoir. unless kung merong mga long rides nag'i-inspect po ako ng mga reservoir such as brake fluid at coolant. pero wla namang leaks occuring at all the brakes at the tires even in the lines Sir.
Tanong ko lang Sir. Saan po banda nka tap ung Hydrovac ng hoses at lines sa intake manifold. I have a d4bh tci engine.
Thanks a lot Sir for your help.
-
Verified Tsikot Member
- Join Date
- Feb 2019
- Posts
- 8
May 14th, 2019 03:24 PM #7Sir Are you familiar with starex engine? (d4bh tci engine) di ko kasi alam if merong check valve sa lines ng hydrovac. since doon mismo sa booster eh wla pong check valve doon. i think sa tapping point ng intake manifold. but i cant identify kung saan banda nka tap ung linya ng hydrovac kasi umikot sa likod nung makina ung tubo ang hose kung kayat medyu mahirap po mkita kung saan patungo.
Thanks sa tulong nyu po Sir
-
May 14th, 2019 03:26 PM #8
iisa lng vac lines papasok ng brakebooster(big round thing attached to the brakemaster) you can trace from there.
-
May 14th, 2019 03:54 PM #9
This is what the brake booster on the Starex would look like (with the brake master removed).
In the picture, the vacuum hose is on the upper-right, and the brake booster vacuum sensor at the bottom left.
-
Verified Tsikot Member
- Join Date
- Feb 2019
- Posts
- 8
May 14th, 2019 03:55 PM #10Sir sinubokan ko na po i'trace kung saan banda sa intake nka tap ung vaccuum hose ng hydrovac. tlagang mhirap. kasi umikot sa likod ng makina ung tubing at hindi ko rin masyudo msilip kasi limited tlga ung space under the hood ng starex. padating nmn sa intake dami nang tubes ang nkalabas at tinakpan pa ng EGR, Turbo charge at mga manifold ung mga tubing. kaya tlgang pahirapan ung pag'trace Sir.
3M Color Stable series are all above 50% TSER. RFID readable through the tint, stays good for...
What's the best car tint brand and color?