i have a 95 corolla 2E engine M/T. it makes a dragging sound (nanginginig) kapag ni-release sa primera. ano kaya problema? parang mababa rin kasi ang menor pero kapag tinaasan mo naman may times na hindi namamatay ang makina kapag pinatay mo ang makina. clutch kaya problema or what? another question... what will happen kung mali ang adjustment ng distributor? ang nakalagay sa manual 10 degrees lang. what will happen kung sobra (more than 10 degrees)? kung kulang kaya? please help. thanks.
The Largest Car Forum in the Philippines
- Forums
- Discussions
- Events
- Community
Results 1 to 4 of 4
-
Tsikot Member
- Join Date
- Jan 2005
- Posts
- 1
January 26th, 2005 02:45 AM #1
-
Tsikot Member Rank 2
- Join Date
- Jan 2003
- Posts
- 689
January 26th, 2005 03:35 AM #2had the same problem which was solved by replacing the clutch. di na raw pantay yung lining ng clutch.
-
Verified Tsikot Member
- Join Date
- Oct 2009
- Posts
- 72
March 12th, 2010 06:57 AM #3
Originally Posted by berting
If the dragging usually happens in the first gear and with a normal engine temperature. It is usually the clutch disc (slipping/engagining in a fast rhythmic cylce). If you are pertaining to your idle. it should be within 800 to 950rpm. But it will not make your clutch drag, by increasing your idle you will sometimes eliminate the dragging but the main problem is still there.
Your 2E Engine should be time at 10 degree with all vacuum hose disconnected from the vacuum advancer and plug. Kung sobra ang timing you will have a degraded engine power, if sobra-sobrang advance may tiyope (knocking sound) ka na maririnig. If retarted or kulang again may loss in engine power too, if its too retarted big engine loss of power and overheating.
-
Tsikoteer
- Join Date
- Jan 2005
- Posts
- 443
March 15th, 2010 09:54 AM #4That's a clear case of clutch drag. Replace your clutch and have your flywheel refaced.
Reply With Quote
Originally Posted by berting
