How will they implement this? Change plate when you renew? Eh yung simpleng sticker at plate no for new cars hindi magawa change plate pa for all existing vehicles?
hays.. kung nabebenta lang ang utak mahal mabibili yung mga utak ng mga hinayupak na nasa LTO, MMDA, LTFRB, at kung anu anu pa... slightly used eh..
mga bwisit. :doh:
di ba nila naisip na dapat by phase ang implementation nyan.. unahin nila palitan yung mga plates na nauna pa sa current design ng plate (yung mga walang rizal monument) at isa pa dapat at a minimized cost... lugi naman yung mga maalaga sa plaka, at yung mga kakakuha pa lang ng plaka...![]()
Repost ko na rin dito, alam niyo ba kung pwede tong plate na ganito:
4 numbers lang kasi talaga yung conduction sticker diba, so dapat TS 5887 lang nakasulat. Kaso bitin pag 4 numbers kasi may sapce between the 7 and the yellow fraction. So I was wondering, bawal ba kung TS 05887? Ang importante lang naman yung dulo for coding diba?
Wala kasing guidelines dun sa rule eh, basta lang nakasulat yung conduction mo..technically hindi yan yung conduction number kasi walang 0 but gets naman diba kahit meron.
Tingin ko ok lang naman. Ung dulo lang din naman ung karaniwang binabasa ng mga enforcer
Sent from my GT-I9082
Kung papalitan na lang din nila. Baka may chance pa na magrequest ako ng customized plate? Eg: BEN 8888
If that is the case, paano ang distribution nito? I have to get the plates at a specific place lang? Parang magulo ata yun, lalung lalo nila sasabihin na you get your plate kung saan ka naka rehistro. For sure pupunta ka roon at wala pala ang assigned plates mo at di pa dinedeliver. Babalikan mo palagi.
Well, I think the fastest and less confusing way is to have the new plates sent to the LTO office where you will next register your car. Sa araw ng pagpaparegister mo, the LTO branch will make a request from the LTO Cental Office for your new plates, then you will be asked to return on a set date to make time for the manufacture and delivery of your new plates. When it's time to pickup your new plates, you'll have to surrender your old plates, and they will install your new plates with their security screw.
Signature
I think this is a nice move IF AND ONLY IF they (LTO) are not short in production of car plates.
Imagine having to produce car plates for ALL the vehicles in the PH, although gradually is still not an easy job but by the timeline mandated, enforcers will be expecting you to sport the new plate already.
A welcoming change though for the car plates going from green over white to black over white. Easier to read because of better contrast.
And since they are in this scenario, they must establish the rule of No Plate No Travel policy - issuing plates to new vehicles and attaching them before the car leaves the dealership.
For vanity plates, they must have an ordinary plate while waiting for their vanity plate to arrive.
This is the same exact implementation we have here in CA and I really think this is a good idea for everyone.
para sa akin, gawin na lang nila sa mga bagong sasakyan. bakit pa nila papahirapan sarili nila? ano, as in lahat ng sasakyan sa pinas ganyan??? baka sa loob ng isang taon, di nila matatapos and distribution yan (at marami nang nakulimbat).
Malaking pera rin kasi ang invole sa prosesong ito. Kung 'yan eh gagawin lang sa mga bago o future vehicles
pa lang, aba eh konti / barya lang 'yun. Ilang taon pa gugugulin para kumita ng milyon.
Kung 'yan eh gagawin nila ngayon sa lahat ng mga luma at bagong sasakyan, aba eh BILYON ANG KIKITAIN NILA,
ORA MISMO! Tayo (vehicle owners) rin naman ang talagang mahihirapan. Mag- aabang lang sila ng mga mag-
papalit ng license plates at tatanggap ng bayad...
Sa buong proseso, TAYO ANG NAHIHIRAPAN HABANG SILA ANG YUMAYAMAN! :mad:
yari na naman si juan de la cruz ... ang gagaling talaga maka-isip ng pagkakikitaan ang gobyerno noh?
kotongerong gobyerno!
yari sa hpg ang wala pang bagong plaka pagpatak ng nobyembre? kotong syempre!![]()
I just don't get it why the need for this, to what end does it serve? pinahirapan lang si juan.
if one of its purposes is to circumvent plates running out from the 3-letter-3-number combination only to transfer all of these to the new scheme, then ganun din coz it's going to eat up a large chunk of the combinations while allowing only for additional space. why not just let the old plates be as they are and implement this new policy prospectively?
security purposes? i doubt this is going to deter would-be carnappers. or maybe the powers-that-be halfwits in the LTO are working on the assumption that criminals would be switching plates if they go on a robbing spree, hence the need for the security lock.
i only hope this will not become another money-making machine to fatten the coffers of them scoundrels.
Kaya meron niyan is to put standards and uniformity.
kung hindi rin papalitan yun iba (old plates) na defeat din yun purpose nito.
I do hope and pray na gawan lang nila ng efficient na sistema on surrendering and asking for new plates.
and sana higpitan na yun enforcement regarding bawal na yun kung ano anong abubot sa plate numbers
tilting plates / tinted glass covers/ ayaw mag pa identify eh di alisin na lang nila plaka nila.
question lang
may nilabas na ba itsura nung new plates?
and dun sa one way screw, does it mean pagkakuha mo sila na ang mag install?