Welcome to all owners of Toyota Fortuner [continued]

[zechs]

Guys ang dami na palang 4x2 variant ng fortuner. Ano ba difference nung V variant sa G variant?

[ocean explorer]

Guys ang dami na palang 4x2 variant ng fortuner. Ano ba difference nung V variant sa G variant?

V = 3.0L diesel 4x4
G = 2.5 M/T or A/T diesel 4x2
2.7 A/T Gas 4x2

[jut703]

V = 3.0L diesel 4x4
G = 2.5 M/T or A/T diesel 4x2
2.7 A/T Gas 4x2

Merong V na 4x2 with the 2.5 VNT engine.


Sent from my iPhone using Tapatalk

[yvesthebest]

Leather seats GPS power seats

[crazy_boy]

sharing a picture of a broken radiator post of Fortuner. same lang radiator ng Foruner, innova, and hilux. whether 2.5 or 3.0




apparently, mabilis mabali yung post connecting to the reservoir.

[dr. d]

sharing a picture of a broken radiator post of Fortuner. same lang radiator ng Foruner, innova, and hilux. whether 2.5 or 3.0




apparently, mabilis mabali yung post connecting to the reservoir.

why is there a big space between the radiator and the fan shroud on the right side?
is it the fan shroud or is it the radiator, that is not bolted right?
baka naman, it is the radiator, causing a lot of vibration, causing that inlet tube to break..?

[crazy_boy]

why is there a big space between the radiator and the fan shroud on the right side?
is it the fan shroud or is it the radiator, that is not bolted right?
baka naman, it is the radiator, causing a lot of vibration, causing that inlet tube to break..?

ah, the mechanic was already removing the bolts when i took this photo. you will notice that the coolant reservoir was unbolted na din in the photo

[dr. d]

ah, the mechanic was already removing the bolts when i took this photo. you will notice that the coolant reservoir was unbolted na din in the photo

is the radiator for repair, or complete replacement?
puede ba repair / replacement of inlet tube only, or entire tub? plastic tub again, or metal replacement tub?

[number001]

sharing a picture of a broken radiator post of Fortuner. same lang radiator ng Foruner, innova, and hilux. whether 2.5 or 3.0


apparently, mabilis mabali yung post connecting to the reservoir.

Does your radiator come with a cap? I don't see it.

On my 06 Fort, the radiator has a traditional cap and a few cm. below is where the outlet tube for the reservoir tank is attached.

[number001]

sharing a picture of a broken radiator post of Fortuner. same lang radiator ng Foruner, innova, and hilux. whether 2.5 or 3.0


apparently, mabilis mabali yung post connecting to the reservoir.

Does your radiator come with a cap? I don't see it.

On my 06 Fort, the radiator has a traditional cap and a few cm. below is where the outlet tube for the reservoir tank is attached.

[crazy_boy]

Does your radiator come with a cap? I don't see it.

On my 06 Fort, the radiator has a traditional cap and a few cm. below is where the outlet tube for the reservoir tank is attached.

no radiator cap. unit is with 1KD engine. the cooling system is a closed loop type, so i just add coolant in the reservoir.

[tahxcool]

Rare po ba talaga mga club ng fortuner owners? May nakita ako isang club mukhang hindi active e..may masasuggest po ba kayo na ok na club?

[timming_gear]

Rare po ba talaga mga club ng fortuner owners? May nakita ako isang club mukhang hindi active e..may masasuggest po ba kayo na ok na club?

Active ang Fortuner club lalo na sa North.

[tahxcool]

Mga bossing share ko lang project ko kanina lang umaga..gamit ko carlas rubber paint galing sa blade..

[negon]

Mga bossing share ko lang project ko kanina lang umaga..gamit ko carlas rubber paint galing sa blade..

Kita ko din kanina sa blade yung carlas, bibili na din sana ako pero nagdalawang isip ako kc d ko kilala yung brand. Musta nmn sir yung carlas?

[tahxcool]

Kita ko din kanina sa blade yung carlas, bibili na din sana ako pero nagdalawang isip ako kc d ko kilala yung brand. Musta nmn sir yung carlas?

Mas manipis sya sa plastidip pansin ko kasi sa mga video guide 4 layers lang and 20 mins apart..tinatry ko tanggalin yung excess sa gilid mejo mahirap pa kaya ginawa ko 6 layers, ayun madali tanggalin yung excess..hehe so far ok naman..yung chrome sa rear 1 week na ok pa naman..

[r-rod81]

Mas manipis sya sa plastidip pansin ko kasi sa mga video guide 4 layers lang and 20 mins apart..tinatry ko tanggalin yung excess sa gilid mejo mahirap pa kaya ginawa ko 6 layers, ayun madali tanggalin yung excess..hehe so far ok naman..yung chrome sa rear 1 week na ok pa naman..

Bro natry mo na din ba sa mags yung carlas? Iniisip ko din bumili niyan. Laking mura kasi compared sa plasti dip.

[tahxcool]

Bro natry mo na din ba sa mags yung carlas? Iniisip ko din bumili niyan. Laking mura kasi compared sa plasti dip.

Hindi pa bossing..pag nagsawa na siguro ako sa color bg mags ko.. Dumihin mags tingin ko mahigirapan ka linisin pag sa mags..unless yung hindi matt texture ilalagay mo..

[negon]

Mga bossing share ko lang project ko kanina lang umaga..gamit ko carlas rubber paint galing sa blade..

*tahxcool tanong ko lang sir kung anong brand ng masking tape ginamit nyo. May nakabanggit lang sa akin na may mga certain na masking tape na nagrereact dun sa rubber paint eh. Not sure kung totoo. Salamat.

[tahxcool]

*tahxcool tanong ko lang sir kung anong brand ng masking tape ginamit nyo. May nakabanggit lang sa akin na may mga certain na masking tape na nagrereact dun sa rubber paint eh. Not sure kung totoo. Salamat.

Yung masking tape lang na nabibili sa national bookstore gamit ko..sp far di naman nagrereact..basta lagyan mo lang ng at least 1 inch allowance sa target mo na part para pag tanggal mo ng tape di affected yung gusto mo na parts..dont worry sa mga excess na spray dun sa allowance mo since madali lang sya tanggalin pag thick enought(4-6 layers) eto yung sakin yung naka tape pa..