Results 1 to 6 of 6
-
March 15th, 2012 12:50 AM #1
hello po im a newbie here * tsikot, may tanong lng po sana ako regarding sa car emblems, ano pong magandang gamitin pang dikit ng emblem? ok lng po kayo yung nasa ace hardware na 3M super Strength Adhesive glue? ano po gamit nyo mga sir? thanks in advance nlng po sa mga tutulong.
-
March 15th, 2012 09:06 AM #2
I used 3M auto moulding tape before; worked okay. The tricky part was placing and tracing it cleanly to the emblem.
-
March 15th, 2012 09:01 PM #3
if you have to use glue, stay away from mighty bond or super glue.
a small amount of rugby (contact cement) will do the trick. it's easy to undo, and it won't cause permanent damage.
-
March 15th, 2012 10:24 PM #4
Pwede na yung sinabi ni vinj, as much as possible stay away from glue. ;)
-
March 15th, 2012 10:53 PM #5
here's a good product for emblems , badges, mouldings. only problem is mahirap gupitin especially sa emblems.
-
Verified Tsikot Member
- Join Date
- Mar 2012
- Posts
- 5
March 21st, 2012 09:04 PM #6
Buhay na buhay ang BGC this evening. Bukas halos lahat ng restaurants. Sabi pa nung isang cashier...
Traffic!