Remote Controlled Power Windows

[Ginnova]

Guys check this out. My latest project on my beloved Innova

[ame="http://www.youtube.com/watch?v=67Hnh9WGanY"]http://www.youtube.com/watch?v=67Hnh9WGanY[/ame]

[tc327]

Guys check this out. My latest project on my beloved Innova

http://www.youtube.com/watch?v=67Hnh9WGanY

sir ok yan ah how it was done pa share naman

[xda2jojo]

Here is my wild guess...
The wire connected to power lock actuator rerouted to power window master switch...

very nice idea eto...
what you have to do with door is lock/unlock manually.

disadvantage of this is mas madaling ma wear-out ang 4 power window motor
mas mura power lock actuator...
unless otherwise dalawa ang RC, one for windows and one for doors
i think may isang provision ang RC for rear door lock that can be use as master door lock...

wow talaga...galing.
sir Ginnova, auto engine start(AC ON) naman para complete na....hehehe

[paolorenzo]

I doubt if that's stock TVSS working the windows. Multiple presses eh (3x) for close and open. Ano yan sir Ginnova, Autopage ba? Nice project sir.

[renzo_d10]

Same technology nung sa Ford Focus.

Ganyan din. Remote controlled power windows.

Nice to have, I just don't get the point of having those. No offense meant, though.

[Ginnova]

Same technology nung sa Ford Focus.

Ganyan din. Remote controlled power windows.

Nice to have, I just don't get the point of having those. No offense meant, though.

Actually my first goal is to automate all 4 windows to go all the way up or down with a single push/pull of the button. this is just an added feature.

Na-iinis kasi ako kapag galing tool booth , kailangan pa steady i-pull yung power window button para magfully close yung window ( for Innnova ). No auto roll-up feature.

Pag nagpapark ako sa bahay especially at night , kailangan ko ibaba yung both front windows to have good visibily. kadalasan nakakalimutan ko isara
yung windows sa passenger side at nakikita ko lang kapag nakababa na ako sa kotse. bad thing is need to insert key to close the window.

Also my ride is always parked under the sun at most of the time need to
open all 4 windows para sumingaw ang init. so i decided to built this project. Of course , dagdag pogi points din.

[Ginnova]

I doubt if that's stock TVSS working the windows. Multiple presses eh (3x) for close and open. Ano yan sir Ginnova, Autopage ba? Nice project sir.

I used the stock TVSS module ( to save on cost ) to control the window. pwede gumamit ng ibang alarm.

[Ginnova]

Here is my wild guess...
The wire connected to power lock actuator rerouted to power window master switch...

very nice idea eto...
what you have to do with door is lock/unlock manually.

disadvantage of this is mas madaling ma wear-out ang 4 power window motor
mas mura power lock actuator...
unless otherwise dalawa ang RC, one for windows and one for doors
i think may isang provision ang RC for rear door lock that can be use as master door lock...

wow talaga...galing.
sir Ginnova, auto engine start(AC ON) naman para complete na....hehehe

I used the stock alarm to control the window and some logic and switching circuits to control the windows up /down. this is still my protoype. some changes will be implemented based feedbacks. I might change the setting to 2 press only to activate it.

[shibby75]

so everytime you unlock your door lock, bubukas ang bintana?

[Ginnova]

so everytime you unlock your door lock, bubukas ang bintana?

No, need to press 3 times para magbukas. single press will be ignored by the auto roll up/down system.

[aldrinvaldez]

Guys check this out. My latest project on my beloved Innova

http://www.youtube.com/watch?v=67Hnh9WGanY

SIR,
PANO MO GINAWA YAN? MAY DEVICE KA PA BA NILAGAY? TURO MO NAMAN SKIN SIR KUNG PANO YAN AT SAN NAKAKABILI NG DEVICE NIA KUNG MERON MAN. EMAIL MO AKO D2 "valdez.aldrin*yahoo.com.ph"


thanks po

[Ginnova]

meron ako control module which I connected to the power window motor.