proper way of closing a hood on corolla bigbody???

**EE100shiro** · April 5th, 2012 03:20 PM

bibitawan sa ere ung hood para mag lock

or
itulak na lang pababa ung hood

**renzo_d10** · April 5th, 2012 03:37 PM

Bitawan sa ere. Thats what i do ever since. Hinde naman halfway through ha, mga 1 1/2 inches lang siguro from the lock

**gearhead000** · April 5th, 2012 03:43 PM

Both, pero more on tulak ako. Kapag bagong wax, or madumi ang kamay ko kakakalikot, at ayaw ko magka-fingerprints agad, bagsak mode na lang.

**ozcity** · April 5th, 2012 04:10 PM

i think the proper way is the bagsak style.....kasi pag tinulak mo yan baka lumubog yung hood or magkaroon ng dent.

**ghosthunter** · April 5th, 2012 05:41 PM

I normally drop the hood from 2 inches.

**stavros** · April 5th, 2012 07:19 PM

Pag ginawa yung method 2, hindi naman sumasara eh.

**j_dipad** · April 5th, 2012 07:42 PM

Drop the hood, ganyan ako sa lahat ng tsikot namin. yan din ang sabi samin sa toyota nung bumili kami ng vios. pero yung sakto lang ang taas na alam mo na masasara na.

**Retz** · April 5th, 2012 08:00 PM

method 2 ginagawa ko.

**oj88** · April 5th, 2012 08:27 PM

For older cars that uses thick sheet metal, either methods are ok. For the newer cars with thinner sheet metal, method 1 is the correct manner and the best practice.

**EE100shiro** · April 5th, 2012 10:14 PM

may haka haka kasi dito baka daw masira ung bulb ng headlight pag ginamit ung 1st method (corolla malapad,mabigat hood)hehehhehe eh hindi pa naman ako nasisiraan ng bulb