Results 1 to 6 of 6
-
January 4th, 2012 05:22 PM #1
mga bro, medyo tinatamad nako mag search sa haba ng toyota innova owners & discussions thread eh
pero baka may nakakaalam ng concern kong ito...
sa starting ng innnova diesel (E), mapalag ba yung makina nyo? yung pag start mo ng engine from cold start eh parang kumakalampag ng malakas yung makina to the point na pati yung shift stick sa loob eh humahampas? i referred this problem sa casa nung last PMS ko pero di nila na solve. baka meron may similar experience sa inyo. would any one know what could be the problem?
-
January 4th, 2012 06:10 PM #2
The idling is still normal when you do a cold start? Or is it too low? How are the engine mounts?
-
January 4th, 2012 09:58 PM #3
anung year model innova mo sir?
yung sakin di naman ganun eh. G diesel yung sakin.
ipacheck mo sa iba sir, pa scan mo. tapos pag me sira i claim mo sa warranty kung me warranty pa unit.
ilan na ba ODO reading?
anu yan sir, pag cold start lang or everytime na start? ganu katagal ganyan yung engine pag idle?
di naman ba mataas RPM pag idle?
-
January 5th, 2012 09:43 AM #4
anung year model innova mo sir? - innova E 2010
yung sakin di naman ganun eh. G diesel yung sakin.
ipacheck mo sa iba sir, pa scan mo. tapos pag me sira i claim mo sa warranty kung me warranty pa unit.
ilan na ba ODO reading? - 32K+ na pero parang nung bago pa lang sya ganun na
anu yan sir, pag cold start lang or everytime na start? - from cold start lang; pag warm, paminsan-minsan ganun din
ganu katagal ganyan yung engine pag idle?
di naman ba mataas RPM pag idle? - normal lang idle RPM, mga 800 rpm. pag cold start lang talaga.
-
January 5th, 2012 12:26 PM #5
Di kaya nalipat yung makina ng Isuzu mo sa Innova? :D
If the idling is normal, my first thing to check would be the mounts.
Try also getting another Toyota CASA opinion. Sayang as under warranty pa yung car mo; and they have to observe it when the car does a cold start to really see the problem. I had a bad encounter already with Toyota P. Tamo before where they kept dodging the issue on the unit (2005 Innova G) when it was still under warranty. They kept resorting to reprogramming when the unit had the D4d stalling issue then when the warranty expired, iba na yung pinanpagawa nila for the same problem.
-
Tsikoteer
- Join Date
- Jun 2008
- Posts
- 1,741
January 6th, 2012 12:53 AM #6
3M Color Stable series are all above 50% TSER. RFID readable through the tint, stays good for...
What's the best car tint brand and color?